Unipolar Hall Sensor AH3141
9Pages

{{requestButtons}}

Catalog excerpts

Unipolar Hall Sensor AH3141 - 1

Unipolar Type Hall SensorAH3141

Open the catalog to page 1
Unipolar Hall Sensor AH3141 - 2

Unipolar Type Hall Sensor AH3141 ◆ Features  Rated working voltage 4.5 V ~ 24 V, the limit voltages as low as 3.5 V;  Operating temperature range: -40℃ ~ 150℃;  Rated output current(sink) : 25 mA, the maximum output current(sink): 50 mA  Switch response time is about 1μs, the operating frequency DC ~ 100 kHz;  Small temperature drift between operating point and release point;  There are variety of packages and out packing options;  No mechanical contact, no spark, switch signal stability, no shaking moment, high reliability and safety;  Products meet the EU RoHS instruction 2011/65...

Open the catalog to page 2
Unipolar Hall Sensor AH3141 - 3

Unipolar Type Hall Sensor AH3141 ◆ Outline When the “S” pole of magnet faces the mark surface of the sensor and is closed to sensor (B≥Bop) ,the sensor outputs low level; When magnet is far from sensor(B≤ BRP) , the sensor outputs high level. When the “N” pole faces the mark surface,the sensor is no response. Stable Hyteresis((BH= |BOP- BRP|)ensure the Stable sensor’s switch status. The magnet and electric transfer characteristic curve is shown as the figure: 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD: 南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi...

Open the catalog to page 3
Unipolar Hall Sensor AH3141 - 4

Unipolar Type Hall Sensor AH3141 Hall sensor AH3141 is one of unipolar excitation single-ended digital output Hall IC. The sensor chip has built-in reverse voltage protection, voltage regulators, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger and open collector output drives circuit unit. Excellent voltage regulator and temperature compensation circuit ensure the sensor stable operates over a wide voltage range and temperature range, and the reverse voltage protection circuit avoids the sensor to be damaged by reverse voltage. 南京艾驰电子科技有限公司...

Open the catalog to page 4
Unipolar Hall Sensor AH3141 - 5

Unipolar Type Hall Sensor AH3141 ◆Limit Parameter Parameter Storage Temp. Supply Voltage Output Cut-off Voltage Magnetic Induction Output Current ◆Electrostatic Grade Under human being mode, the Electrostatic compression is large than ± 6kV. 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD: 南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TEL:86-25-

Open the catalog to page 5
Unipolar Hall Sensor AH3141 - 6

Unipolar Type Hall Sensor AH3141 Pm-il\U Paramater Symbol Test Condition Typ. Max Unit Output Rise Edge Time Output Fall Edge Time 6/5 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD 33 ^SII^fiff£III B 202-2 S Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 E-mail : nianrong@ahest.com Web: www.ahest.com

Open the catalog to page 6
Unipolar Hall Sensor AH3141 - 7

Unipolar Type Hall Sensor AH3141 Pm-il\U Test condition : VCCi = VCC2 =24V , IO = 50mA Note 1: Unit is mT, 1mT=10Gs Note2: When the “S” Pole of the magnetic field is vertical to the front mark of product, we call the magnetic field B > 0. Note3: For M type (SOT23-3L) product, the operating magnetic field is subject to “N”Pole. H9 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD 33 B 202-2 S Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 E-mail : nianrong@ahest.com Web: www.ahest.com

Open the catalog to page 7
Unipolar Hall Sensor AH3141 - 8

Unipolar Type Hall Sensor AH3141 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD: 南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 211103 TEL

Open the catalog to page 8
Unipolar Hall Sensor AH3141 - 9

Unipolar Type Hall Sensor AH3141 Note: In the above package outline figure, Pin 1: Vcc, Pin2: GND, Pin 3: Output terminal.  Mark Mark “XX” or “AHXX” are abbreviation form of the parts No., the second line”XXXX”means product lot No. M type: It’s face to the product’s mark, and the 2 pins are downward, from left and as per clockwise, the pin No. is 1,2,3 in proper order 南京艾驰电子科技有限公司 NANJING AH ELECTRONIC SCIENCE & TECHNOLOGY CO.,LTD ADD: 南京市江宁区东麒路 33 号国际研发园 B 幢 202-2 室 Room 202-2, Bldg B, 33, Dongqi Road, Nanjing, 2111

Open the catalog to page 9

All Nanjing AH Electronic Science and Technology Co. catalogs and technical brochures