Omnipolar Hall sensor AH3661 (Latch Type)

Omnipolar Hall sensor AH3661 (Latch Type)

Omnipolar Hall sensor AH3661 (Latch Type)

Product catalog summary
Features and Benefits
  • Digital output with omnipolar latch functionality.
  • Stable performance across a temperature range of -40°C to 85°C.
  • Low operating voltage range from 2.5V to 5.5V.
  • Strong resistance to mechanical stress and non-contact output for safety and reliability.
  • Available in TO-92UA and SOT-23-3L package options.
  • Compliant with EU RoHS and REACH standards.
Application Examples
  • Automotive, consumer, and industrial electronics.
  • Water flow sensing and liquid level detection.
  • Position sensing and contactless key/button applications.
  • Hand-held equipment like cellphones and notebooks.
  • Bluetooth headsets and door latch systems.
Selection Guide
  • AH3661/E-M: SOT-23-3L surface mount, -40ºC to 85ºC, 3000 pieces per reel.
  • AH3661/E-UA: SIP through hole, -40ºC to 85ºC, 1000 pieces per bag.
General Description

The AH3661 is a digital micropower omnipolar Hall IC with a single output, featuring a reverse voltage protector, voltage regulator, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger, and open-drain output driver. It is designed using CMOS technology for lower supply voltage and power consumption.

Electrical Operating Characteristics
  • Supply Voltage (VCC): 2.5V to 5.5V.
  • High-level Output Voltage (VOH): 3.3V max.
  • Low-level Output Voltage (VOL): 0.3V max.
  • Awake Supply Current (ICC_Awk): 2.8mA typical.
  • Sleep Supply Current (ICC_Slp): 2μA max.
Magnetic Operating Characteristics
  • South Operating Point (BOPS): 1.0mT min, 6.0mT max.
  • South Release Point (BRPS): -6.0mT min, -1.0mT max.
  • Hysteresis (BH): 1.3mT typical.
Absolute Maximum Ratings
  • Supply Voltage (VCC): 5V max.
  • Output Current (IOUT): 1mA max.
  • Operating Temperature (TA): -40°C to 85°C.
  • Storage Temperature (Tstg): -50°C to 160°C.
  • Maximum Junction Temperature (TJ(max)): 165°C.
Magnetic Behavior

The sensor outputs a low level when the magnetic field is close (|B|≥|BOP|) and a high level when it is far (|B|≤|BRP|). Steady hysteresis ensures stable switch status.

Package Information

Dimensions for SOT-23-3L and TO-92UA packages are provided, with detailed measurements for each component.

See more

Catalog excerpts

Omnipolar Hall sensor AH3661 (Latch Type)-1

Digital Micropower Omnipolar Hall IC △ Digital output, omnipolar latch △ Automotive electronics, Consumer electronics and Industrial electronics △ Water flow sensing △ Liquid level detection △ Position sensing △ Hand-held equipment (Cellphone, Pan-Tilt, Notebook, etc.) △ Contactless key/button △ Bluetooth headset △ Door latch system △ Stable over the entire temperature range △ Low operating voltage range: 2.5V ~ 5.5V △ Strong resistance to mechanical stress △ Non-contact output, safety and reliable △ Operating temperature range: -40℃ ~ 85℃ △ TO-92UA and SOT-23-3L package options △ Developed according to the EU RoHS and REACH 3 Selection Guide Part Number Mounting 3-pin SOT23-3L surface mount 3-pin SIP through hole NOTE 1. Hall ICs are soldered tin brazing for assembly, and wave soldering of SOT-23-3L surface-mounted components poses a risk of failure. 2. A risk of circuit failure may happen in non-brazing processes such as electric resistance welding, high-frequency welding, etc. 3. E: -40~85°C; K: -40~125°C; L: -40~150°C. Nanjing AH Electronic Science & Technology Co., Ltd. ADD: Building 3, Huaye Park, Qidi City, 8, Zhineng Roa

 Open the catalog to page 1
Omnipolar Hall sensor AH3661 (Latch Type)-2

Digital Micropower Omnipolar Hall IC 4 General Description The AH3661 is a digital omnipolar-latch Hall IC with single output. It has good temperature stability and operates over a temperature range of -40°C to 85°C with latch function. The AH3661 Hall-effect sensor includes the following on a single silicon chip: reverse voltage protector, voltage regulator, temperature compensation circuit, Hall-voltage generator, signal amplifier, Schmitt trigger and open-drain output driver, etc. The AH3661, produced with CMOS technology, is asked for lower supply voltage and less power supply. It is available...

 Open the catalog to page 2
Omnipolar Hall sensor AH3661 (Latch Type)-3

Digital Micropower Omnipolar Hall IC 6 Absolute Maximum Ratings Characteristic Supply Voltage Output Current Symbol IOUTSINK Magnetic Flux Density Operating Temperature E Too high a Tj could lead to electrical or thermal breakdown Maximum Junction Temperature Storage Temperature NOTE 1. Human Body Model according to AEC-Q100-002 standard. 7 Electrical Operating Characteristics valid through the full operating temperature range; unless otherwise specified Test Conditions Supply Voltage High-level Output Voltage Low-level Output Voltage Average Supply Current Awake Supply Current Sleepy Supply...

 Open the catalog to page 3
Omnipolar Hall sensor AH3661 (Latch Type)-4

Digital Micropower Omnipolar Hall IC 9 Magnetic Behavior When the magnet (S or N pole) is close to the sensor (|B|≥|BOP|), the sensor outputs a low level; when the magnet is far away from sensor (|B|≤|BRP|), the sensor outputs a high level. Steady Hysteresis (BHX=|BOPX- BRPX|) ensures its stable switch status. The magnetoelectric conversion characteristics of AH3661 are shown in the figure: Vout switch to high Vout switch to high Omnipolar Switch Nanjing AH Electronic Science & Technology Co., Ltd. ADD: Building 3, Huaye Park, Qidi City, 8, Zhineng Road, KyLin Technology Innovation Park, Nanjing,...

 Open the catalog to page 4
Omnipolar Hall sensor AH3661 (Latch Type)-5

Digital Micropower Omnipolar Hall IC Low Average Power Internal timing circuit activates the IC for 45 µs and deactivates it for the remainder of the period (45 ms). A short "awake" time allows for stabilization prior to the sampling and data latching on the falling edge of the timing pulse. The output during the "sleep" time is latched in the last sampled state. The supply current is not affected by the output state. IAWK Period Sleep Period Nanjing AH Electronic Science & Technology Co., Ltd. ADD: Building 3, Huaye Park, Qidi City, 8, Zhineng Road, KyLin Technology Innovation Park, Nanjing,

 Open the catalog to page 5
Omnipolar Hall sensor AH3661 (Latch Type)-6

Digital Micropower Omnipolar Hall IC Nanjing AH Electronic Science & Technology Co., Ltd. ADD: Building 3, Huaye Park, Qidi City, 8, Zhineng Road, KyLin Technology Innovation Park, Nanjing, C

 Open the catalog to page 6
Omnipolar Hall sensor AH3661 (Latch Type)-7

Digital Micropower Omnipolar Hall IC Nanjing AH Electronic Science & Technology Co., Ltd. ADD: Building 3, Huaye Park, Qidi City, 8, Zhineng Road, KyLin Technology Innovation Park, Nanjing, Ch

 Open the catalog to page 7
Omnipolar Hall sensor AH3661 (Latch Type)-8

Digital Micropower Omnipolar Hall IC Package form Operating temperature Device part number 3-pin digital omnipolar series with single output Nanjing AH Electronic Science & Technology Co., Ltd. ● Package Form: M —— SOT-23-3L(SMD) S —— SOT-89(SMD) UA —— TO-92UA/TO-92S(SIP) Note: M and S type are packed in reels, M 3k/reel, S 1k/reel; UA type is packed in bags of 1k/bag or 0.5k/bag. ● Operating Temperature: E —— -40℃~+85℃ L —— -40℃~+150℃ Copyright 2003~2020 Nanjing AH Electronic Science & Technology Co., Ltd. Nanjing AH Electronic Science & Technology Co., reserves the right to improve the performance,...

 Open the catalog to page 8

All Nanjing AH Electronic Science and Technology Co., Ltd. catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.