Diamond /CBN Carbide Cutters Specialty Tools Mounted Points Rubberized Abrasives BUSaETilWiTi! I Polishing Brushes Felt Bobs Abrasive compounds NSK Exclusive Tools & Polishing Tools ^ FLAP WHEELS ♦«iB - Seamless cap abrasives are easily pushed onto a rubber holder and can be quickly changed. Both the sides and ends can be used for polishing and finishing. Cap Seamless Abrasives (Special Rubber Holder) POLISHING BRUSHES Selection and Use of Polishing Brushes ♦ Selection of Brush Materials : Brushes should be selected according to the desired finish. ♦ Length and Diameter of Wire : Longer brush wires are very flexible and best suited to polishing. Shorter brush wires are suited to heavier cutting. Before using, cut the brush wires to the required length. ♦ Density of Wire Material : Higher density wires cut quicker due to their greater rigidity. ♦ Brushing Pressure : Using the edge of the applied perpendicular brush to the polishing surface is the most effective method. Use pressure sufficient to deflect the brush tips 1 to 2 mm. ♦ Rotation Direction of Brush : Set rotation direction of the micro-grinder considering the lay of the bristles. (Nakanishi micro-grinders can rotate in either direction) ♦ Suitable Brush Rotation Speed : Using brushes at less than the maximum allowable speed makes the brush last longer. Confirm suitable rotation speed by test brushing a small area at first. ♦ Features of Polishing Brushes : The brushes confirm to the polishing surface and result in uniform surface finishes. Brushes are superior tools for finishing compared to other tools. Polishing brushes with 02.34 mm and 03.0 mm shanks. They are made from bristle, goat and horse hair. Hard Type • Hardness : Hard • Color : Black • Material : Bristle 15,000 min025 010 Soft Type • Material : Goat Hair Hard Type • Hardness • Color • Material Black Bristle 10 pcs./pack Hard Type • Hardness : Hard • Color : White • Material : Bristle 10,000 min' 013 Medium Type • Hardness : Medium 8 • Color : Brown • Material : Horse Hair , , *Order in standard package quantities.

Hard Type Medium Type Nylon Brush *Order in standard package quantities. Diamond Impregnated Nylon Brush Diamond Impregnated Nylon Brush Abrasive Impregnated (GC) Nylon Brush Abrasive Impregnated (GC) Nylon Brush Abrasive and diamond impregnated nylon brushes. Ideal for fine burr removal and polishing of very small areas. Abrasive Compounds & Polishing Tools Abrasive Compounds & Polishing Tools Felt Bobs Felt Bobs Nylon Brush contained proof material against static electricity Wire diameter [0.15 mm] Polishing Brushes Polishing Brushes Flap Wheels Flap Wheels Armid Fiber Rubberized Abrasives...

& Polishing Tools ST 51575~ ^ INSIDE POLISHING BRUSHES Inside diameter brushes are made from wire fixed to a straight shank. Ideal for polishing internal surfaces, ID threads and curved surfaces. A Do not exceed the maximum rotating speed. Long length brushes are highly susceptible to shank and brush deflection. CAT ~51663 WIRE LAPPING TOOLS Wire lapping tools are made from banded piano wire. Ideal for burr removal and finishing of metals and plastics. They are also suited to polishing with abrasive compounds. Brush Materials Abrasive Impregnated Nylon Brush (GC) Brush Materials Abrasive Impregnated...