Catalogs >
Nakanishi >
NAKANISHI SPINDLE HTS

NAKANISHI SPINDLE HTS
4Pages

Catalog excerpts

YYj NAKANISHI Headquarters * Factory 700 Shimohinata, Kanuma, Tochigi 322-8666, Japan TEL +81-289-64-3520 FAX +81-289-62-1135 www.nakanlshl-lnc.com NAKANISHI INC. 2019

Open the catalog to page 1

“HTS SERIES” TURBINE SPINDLE UPGRADE MACHINING CENTERS TO HIGH SPEED MACHINES SOLUTION High Speed 150,000min-1 Suitable for Small Diameter Milling Negligible spindle expansion • Air Turbine mechanism has extremely low heat generation. • Up to cutting tool R x 0.1 depth of cut is possible. Highly stable milling conditions are possible ever with very small diameter cutting tools diameter : • Usable max. cutting toolSquare End Mill ø1mm Ball End Mill R0.5mm, Large Variety of Tapers Available Air Turbine mechanism has extremely low heat generation. Spindle Runout : Within 1 μm Dramatically...

Open the catalog to page 2

“HTS SERIES” TURBINE SPINDLE UPGRADE MACHINING CENTERS TO HIGH SPEED MACHINES SOLUTION Caution : Do not rotate the machining center's main spindle with the HTS1501 spindle installed. v_) Spindle Runout Air Consumption Spindle Runout Air Consumption < Standard Equipment Accessories > • Collet : 04.0mm (CHA-4.0) • Collet Nut (CHN-AA) • Spanner (8 x 5), (9 x 11) : 1pc. each • Filter Joint (FJ-01) • Hose (K-247) : 06mm x 4.0m < Optional > Collet (CHA Group) < Standard Equipment Accessories > • Collet : 04.0mm (CHA-4.0) • Collet Nut (CHN-AA) • Spanner (8 x 5), (9 x 11) : 1pc. each • Filter Joint...

Open the catalog to page 3

UPGRADE MACHINING CENTERS TO HIGH SPEED MACHINES SOLUTION “HTS SERIES” CASE STUDIES UPGRADE MACHINING CENTERS TO HIGH SPEED MACHINES SOLUTION HTS1501 Series AL-M1202 (06mm Air Output One-Touch Connector) Case Studies <Rough mill for deep cutting, High-speed feeding> F=2,000mm/min (Rough cutting) ■ The AL-M1202 provides simple, automatic conditioning of the air supplied to NAKANISHI air motors. The filter removes water and impure substances from the input air supply. The regulator maintains to proper air pressure and the lubricator ensures proper oil flow to the motor and spindle. This Air...

Open the catalog to page 4