airspeed
23Pages

{{requestButtons}}

Catalog excerpts

airspeed - 2

“Air-Speed” MOTOR SPINDLE One Piece Type Spindle Separate Type Spindle Shorten total spindle length suitable for the compact sized NC or CNC Lathe, and special purpose machines. Free to connect the spindle to the motor for applications. Easy to exchange for repairs. Hardened and precision ground for high rigidity & excellent durability. External housing is one-piece with the spindle & the motor for machine attachments. Outside Diameter Max. Max. Power ø30, ø25, ø23, ø22, ø20, ø19.05mm 30,000min-1 O.D. ø30mm 130W (One Piece Type) Angle Type Spindles and Straight Type Spindles are available....

Open the catalog to page 2
airspeed - 3

CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION One Piece Type 030mm One Piece Type 025, 023, 022, 020, 019.05mm (Air Motor lAir Motor n D I D ■(!£=■=■ Axis for Metal Saw KCH-03 Grindstone Axis AGM-03 0=™» 0 [] ij — Grindstone Flange EGF-19 I D I n Axis for Metal Saw KCH-03 !)■ 11[]| i m Grindstone Axis AGM-03 Collet CHSS Group 0l.O~03.175mm Air Motor Spindle PMS-3020A Straight Type Air Motor Spindle PMS-3020A-RA Angle Type Air Motor Spindle PMR-3005K Straight Type Air Motor Spindle PMR-3005K-RA Angle Type 90" Angle Air Motor Spindle PMA-3013S Straight Type * Please...

Open the catalog to page 3
airspeed - 4

CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION AIR MOTOR SPINDLE (One Piece Type) Spindle Runout Max. Power Max. Torque Weight 410g < Specifications > Proper Air Pressure Outside Dia o30mm | Shorten Total Spindle Length AA Suitable for the compact sized NC or CNC Lathe. Motor Hose (Diameter / Length) Air Inlet : 04.0 (I.D.) x 06.0mm (O.D.) x 2m External housing is one-piece with the spindle & the motor for machine attachments ^ Spindle Runout : Within 1 pm Hardened and precision ground for high rigidity & excellent durability Straight Air Motor Spindle PMS-3020K Spindle...

Open the catalog to page 4
airspeed - 5

CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION r A Caution Do not exceed max. allowable air pressure. ▼ AIR MOTOR SPINDLE (One Piece Type) Angle Spindle Grease Point O.D. Max. Rotating Speed at The Cutting Tool Reduction Ratio Spindle Runout Max. Power Max. Torque Weight < Specifications > Proper Air Pressure Angle Spindle Select Sheet < Specifications > Proper Air Pressure Motor Hose (Diameter / Length) Air Inlet : 04.0 (I.D.) x 06.0mm (O.D.) x 2m < Optional > Collet (CHSS Group) < Standard Equipment Accessories > • Collet : 03.0mm (CHSS-3.0) • Silencer (K-209) • Filter...

Open the catalog to page 5
airspeed - 6

^“Air-Speed” motor spindle CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION Spindle Runout Max. Power Air Consumption MSS-25 Series STRAIGHT TYPE (R) 52 Max. Tool Mounting Depth < Specifications > Motor Hose (Diameter / Length) [1] SERIES CODE [2] OUTSIDE DIAMETER [3] SPEED [4] R=FORWARD (Right) [5] CODE FOR 90°ANGLE TYPE Model Code Example Spindle Runout : Within 2 Mm Recommended Clamping Area MSS-25 Series 90° ANGLE TYPE (RA) ipth L Outer Housing Material Made from stainless steel (SUS416) • Configuration 2 Types available, Straight type & 90° Angle type • Highest output...

Open the catalog to page 6
airspeed - 7

CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION O.D. Collet Spindle Runout Max. Power Air Consumption O.D. Collet Spindle Runout Max. Power Air Consumption 022mm O°.5~04.°mm within 2 pm 72w(CHA Group) r (R • RA) ▼ MSST-23 Series STRAIGHT TYPE (R) < Specifications > Proper Air Pressure : 0.3~0.5MPa Motor Hose (Diameter / Length) ▼ MSS-22 Series STRAIGHT TYPE (R) 023-S.o, 4 023-8.01 MSST-23 Series 90° ANGLE TYPE (RA) • MSST-23 Series Torque-Speed Characteristics < Specifications > Proper Air Pressure : 0.3~0.5MPa Motor Hose (Diameter / Length) • MSS-22 Series Torque-Speed...

Open the catalog to page 7
airspeed - 8

^“Air-Speed” motor spindle CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION O.D. Collet Spindle Runout Max. Power Air Consumption O.D. Collet Spindle Runout Max. Power Air Consumption < Specifications > Proper Air Pressure Motor Hose (Diameter / Length) *Refer to Page p.9 for mounting instructions for the 90° Angle Type. * Please mention "Code Number" upon your order.

Open the catalog to page 8
airspeed - 9

CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION Separate Type 030mm Separate Type 022.8mm ra-iZjFi I I | I Axis for Metal Saw KCH-03 Ossa ||Q| Grindstone Axis AGM-03 Separate Type 025mm Grindstone Axis AGM-03 * Please maintain not to exceed speed limit. Excess speed will dramatically reduce bearing life. *1 : Maximum rotating speed at the cutting tool. *2 : Maximum allowable motor speed for the spindle. Speed Reducer ARG-02 (1/15.39 Reduction) * Reduction Gear must be used for Angle Spindle. (RA-100, RA-200, RAS-101) *Please refer to the concerned product introduction...

Open the catalog to page 9
airspeed - 10

CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION AIR MOTOR & SPINDLE (Separate Type) Spindle Runout 90° Angle Type Air Motor is available Spindle Runout : Within 1 pm 50 Max. Tool Mounting Depth * Please mention "Code Number" upon your order. P. 18

Open the catalog to page 10
airspeed - 11

CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION A Please maintain not to exceed speed limit. O. D. Rotating speed at the cutting tool Reduction Ratio Allowable motor speed for the spindle Spindle Runout Collet 2.67 (Using AM-3020R/L) Within |m (CHK Group) g * Maximum rotating speed at the cutting tool for the reduction ratio. 030mm ^ ^ ■ 1 Rotating speed at the cutting tool 50 Max. Tool Mounting Depth Collet Weight To extend the life expectancy of the Speed Reducer, inject grease every 70 to 100 hours. Grease injection prevents friction of the internal gears as well as...

Open the catalog to page 11
airspeed - 12

CNC LATHES, SPECIAL PURPOSE MACHINES AND ROBOT AUTOMATION SOLUTION Please maintain not to exceed speed limit. O.D. Motor Speed Max. Power Proper Air Pressure Air Consumption Weight Rotating speed at the cutting tool Reduction Ratio Allowable motor speed for the spindle Weight < Specifications > Motor Hose (Diameter / Length) Air Inlet : 04.0 (I.D.) x 06.0mm (O.D.) x 2m < Standard Equipment Accessories > • Hose (K-215) : 06mm x 2m • Hose (K-256) : 08mm x 1m • Filter Joint (FJ-01) • Silencer (K-208) • Spanner (22 x 27) : 1pc. * Maximum rotating speed at the cutting tool for the reduction...

Open the catalog to page 12

All Nakanishi catalogs and technical brochures

  1. Sheenus ZERO

    2 Pages

  2. FELT BOBS

    2 Pages

  3. FLAP WHEELS

    3 Pages

  4. PLANET

    6 Pages

  5. ispeed3

    15 Pages

  6. e2000

    10 Pages

  7. e3000

    24 Pages

  8. e4000

    16 Pages

  9. tools

    33 Pages

  10. SONIC-CUTTER

    1 Pages

  11. Xpeed

    2 Pages

  12. HTS

    4 Pages

  13. ROTUS

    2 Pages

  14. Expert 500

    4 Pages

  15. SMS

    4 Pages

Archived catalogs

  1. PANA-AIR

    2 Pages

  2. S-Max M

    8 Pages