The power and the fixation hole depth are changed 15-05-2014 Revisions Description Thermic polyswicht incorporated Voltage magnet in Voltage in thermic polyswicht Technical data: Protection rate: IP65 Insulation class: Y (90ºC) Available voltage: 24, 48, 65, 110 Vdc Standard duty-cycle: 50% Weight: 8,3 kg P at 20ºC= 100W Solenoid coating: Cataphoresis 12:16 um (400 S.S.C) Incorporated NTC thermistor normally closed, winding independent as heat detector: Nominal voltage= 24Vdc Temperature range= -55ºC to 155ºC Nominal resistance: 18kohm R25 =32,762kohm B value (B25/B100)= 4300k Peak temperature= 160ºC-200ºC 1 minute NTC Thermistor characteristics curve The force values are measured in the following conditions: Plate material St37 Plate rugosity:3 um Room temperature Drawn O.Otiñano 27/6/2013 NAFSA S.L. Checked A.Zuberogoitia 27/6/2013 Tittle Approved Coating Unless otherwise indications Drawing dimmensions on milimeters, angles in A3 degrees, tolerances ±0,1 y ±10´ Material: See material list Beveled edge 0,3x45º Scale Weight 8,3 kg Sheet 1 of 1 Rugosity: Ra1,6