Product Overview:
The GSX MILL VL series introduces a new roughing end mill designed to suppress chatter vibrations through unequal division and lead. The optimization of the cutting edge and nick shape enhances chipping resistance and enables high-efficiency machining. The use of high heat-resistant carbide materials and GSX II coating ensures long tool life.

Performance Comparison:
A comparison of wear after machining 10 meters of S50C material shows that the GSXVLRE4 end mill maintains its integrity without chipping, unlike competitor products. This demonstrates improved chipping resistance and longevity.

Cutting Conditions:
For the GSXVLRE4 φ10 tool, the cutting speed is 130 m/min, feed rate is 1000 mm/min, and depth of cut is 0.06 mm/tooth. The machining is performed on S50C material using water-soluble cutting fluid.

Recommendations:
1. Use rigid and precise machines and holders for stable machining.
2. Employ air blow for dry machining.
3. Use wet machining for stainless steel, heat-resistant alloys, and titanium alloys.
4. If chatter occurs, reduce the spindle speed and feed rate proportionally or decrease the depth of cut.

Tool Specifications:
The GSXVLRE4 series offers a range of diameters from 4 mm to 20 mm, with various lengths and shank diameters. The tools are suitable for a variety of materials, including cast iron, aluminum alloys, copper, graphite, heat-resistant alloys, low carbon steel, stainless steel, carbon steel, alloy steel, pre-hardened steel, and hardened steels.

Contact Information:
For inquiries about cutting conditions, tool selection, pricing, and stock availability, contact the nearest sales office or distributor. Detailed contact information for various regional offices is provided.