Catalogs >
NACHI America >
AQUA Drills EX Series

AQUA Drills EX Series
16Pages

Catalog excerpts

AQUA Drill EX AQDEXS

中低速から高速までの広領域で安定高能率加工が可能オイルホールがラインナップされてシリーズ充実 Delivering high-performance consistently in a wide range from moderate-low to high speeds AQUA Drill EX AQDEXS ■高速高能率加工を実現・ ■生材から焼入材まで幅広いニーズに対応 ■小型機械でも高い加工性能を発揮 ■ High-speed & high-efficiency drilling ■ Answering a wide range of needs from raw to tempered metals ■ Get high-performance work even with small machines 高速加工 High speed drilling True blue Comparison of High-speed drilling AlCrTi系耐酸化性膜切削条件工具切削速度送り速度穴深さ被削材切削油剤 TiAl系耐摩耗性膜 Cutting conditions

Open the catalog to page 2

長寿命その1 Long Life Part 1 Flowing curve Durability comparison [amount of wear after drilling 3653 holes] (μm) 300 250 Durability comparison [service life] Hole Fine chips in AQUA Drill EX Cutting conditions Tool Speed Feed Depth Work Material Cutting Fluid 長寿命その2　オイルホールドリル Long Life Part 2 Delicate cut タフハート Tough heart Comparison of wear after 625 holes Comparison of wear on SUS304 wear クレータ摩耗 Crater wear Margin wear

Open the catalog to page 3

アクアドリルEXとアクアドリルの特長 Features of AQUA Drill and AQUA Drill EX Range of application Cutting speed ると同じになります。作業条件にあわせて選定ください。定性を高めるためにはウェト加工をおすッすめします。 AQUA Drill and AQUA Drill EX cover a wide range of jobs. They both have the same work eﬃciency curve for optimized service lives. Select the drill that is best for your job conditions. Both dry and wet drilling are possible. We recommend wet drilling for faster speeds and better consistency. AQUA Drill ■低切削抵抗、高速加工に優れた溝形状 ■小型M/Cなど低剛性機の安定加工 ■低炭素鋼などの切りくず処理難易材 ■中低速から高速までの広領域加工耐摩耗性に優れた特殊刃先形状 ■耐チッピング性、 ■高送り高能率加工が可能 ■高硬度材 ■Superior ﬂute shape...

Open the catalog to page 4

AQUA Micro Drill It is suitable for accuracy drilling grade reaming due to balanced 3ﬂutes. Stable drilling and high reliability in drilling small diameter holes. AQUA Drill NWDX Type AQUA Drill Hard 幅広い用途で安定加工を実現 For stable drilling with wide range of application. 50～70HRCの焼入れ鋼の高能率加工を実現 It is possible to drill hardened material (50̃70HRC). ■切削変動比較 NWDX型 NWDX 貫通時の穴径縮小のトラブルなし Life comparison of drilling in Hardened Mold Steel Cutting force Life comparison of drilling in Hardened HSS

Open the catalog to page 5

AQDEXS EX 757 AQUA Drill EX Stub

Open the catalog to page 6

a mmm* Standard Drilling Conditions Attention on using the drilling condition tables I.Utilize the standard drilling condition shown in the catalogs |ust as the general guide, when starting operation. 2.Ad|ust drilling condition when unusual vibration, different sound occur by cutting. 3.When using low speed machines, use the maximum speed and adjust the feed rate. 4.For drilling with water soluble cutting fluid. 5.Drilling Aluminum Alloy, Light Metal are not recommended. 6.Drilling the step feed in Stainless Steel when hole depth more than 2xDc deep, step feed interval is about 0.5xDc....

Open the catalog to page 7

AQDEXR EXl/*a5 AQUA Drill EX Regular rn&tzm mm mm ^m vvyom »mmrn bsib^ mm mm ^m v^vom »mmrn Code Dc l L Ds Price Code Dc l L Ds Price

Open the catalog to page 8

rn&tzm mm m* Code Dc l L Ds Price Standard Drilling Conditions Attention on using the drilling condition tables I.Utilize the standard drilling condition shown in the catalogs |ust as the general guide, when starting operation. 2.Ad|ust drilling condition when unusual vibration, different sound occur by cutting. 3.When using low speed machines, use the maximum speed and adjust the feed rate. 4.For drilling with water soluble cutting fluid. 5.Drilling Aluminum Alloy, Light Metal are not recommended. 6.Drilling the step feed in Stainless Steel when hole depth more than 2xDc deep, step feed...

Open the catalog to page 9

AQDEXOH3D EX*^IMi-IU3D AQUA Drill EX Oil-Hole 3D

Open the catalog to page 10

Standard Drilling Conditions Attention on using the drilling condition tables 1.Ad|ust drilling condition according to the rigidity of machine or work clamp state. 2.Wet condition are for drilling with water soluble cutting fluid. 3.In non water soluble cutting fluid, reduce the rotation and feed by 20%. 4.Use on internal coolant. 5.In step feed, return to the entrance hole. 6.Step feed interval is about 0.2~1xDc.

Open the catalog to page 11

rn&tzm mm ;ia Code Dc l L Ds Price mmmm* Standard Drilling Conditions Attention on using the drilling condition tables 1.Ad|ust drilling condition according to the rigidity of machine or work clamp state. 2.Wet cond ition are for drilling with water soluble cutting fluid. 3.In non water soluble cutting fluid, reduce the rotation and feed by 20%. 4.Use on internal coolant. 5.When for hole depth more than 5xDc deep, add step seediing. However, a work material and drilling condition to Chip removal may be worse. In that case, add A even if drilling depth 5xDc is as follows. 6.In step feed,...

Open the catalog to page 13

Standard Drilling Conditions Attention on using the drilling condition tables I.Adjust drilling condition according to the rigidity of machine or work clamp state. 2.Wet condition are for drilling with water soluble cutting fluid. 3.In non water soluble cutting fluid, reduce the rotation and feed by 20%. 4.Use on internal coolant. 5.When for hole depth more than 5xDc deep, add step seediing. However, a work material and drilling condition to Chip removal may be worse. In that case, add A even if drilling depth 5xDc is as follows. 6.In step feed, return to the entrance hole. 7.Step feed...

Open the catalog to page 15

AQUA DRILL EX その他のアクアドリルＥＸのシリーズカタログ紹介 Introduce other AQUA Drill EX Series catalogs 切削バランスに優れた３枚刃。リーマレスを可能にする www.nachi-fujikoshi.co.jp 東京本社富山本社営業拠点東日本支社北海道営業所山形営業所福島営業所北関東支店信州営業所中日本支社東海支店北陸支店西日本支社中国四国支店九州支店㈱ナチ関東㈱ナチ常盤㈱ナチ東海㈱ナチ北陸㈱ナチ関西

Open the catalog to page 16

AQUA Drills EX Series 16Pages

Catalog excerpts

All NACHI America catalogs and technical brochures

AQUA Drills EX Series
16Pages