Catalogs >
NACHI America >
AQUA Drill EX VF Series

AQUA Drill EX VF Series
16Pages

Catalog excerpts

The most suitable indexable insert drills for high eﬃciency and high precision drilling of large diameter

The most suitable indexable insert drills for high eﬃciency and high precision drilling of large diameter ■優れたコストパフォーマンス中大径において超硬ソリド・ッドリルに比べ、工具費を大幅に低減 Vマウント方式により、高精度高剛性で簡単な取り付けが可能・耐欠損性の高いチップ材質とアクアEXコートにより長寿命 AQDEXVF用チップに座ぐり傾斜面加工も可能なフラッ・トチップが追加 TVF φ14～φ32 TVFZ φ14～φ32 減衰能に優れた本体材質と高剛性ボディと切削バランスに優れた一体型チップにより高精度加工が可能 ■Excellent cost performance Compare with carbide solid drill about middle and large diameter, to largely save tool cost ■Long tool life By chip material of high chipping resistance and AQEX coat ■High precision It is possible to be high precision drilling by...

Open the catalog to page 2

AQDEXVF 刃先交換式ドリルでも、高精度で安定加工 High precision and Stable drilling even if Indexable insert drill Comparison of wear after drilling 1400 holes Comparison of drilling hole precision Hole diameter Cutting holes Cutting conditions Cutting Speed Hole Depth Rotation Feed Speed Blind hole Non-step drilling Work Material Cutting Fluid Internal Coolant 耐摩耗性が高く、マージン摩耗も小さい High wear resistance and wear of margin is small Stable hole precision and excellent wear resistance Hole expansion Wear of margin is small After drilling 864 holes 加工穴数 Cutting holes Cutting conditions Feed Speed Hole Depth Cutting...

Open the catalog to page 3

適用チップ Applicable Insert

Open the catalog to page 4

適用チップ Applicable Insert ● Standard stock item ：

Open the catalog to page 5

適用チップ Applicable Insert

Open the catalog to page 6

適用チップ Applicable Insert ● Standard stock item ：

Open the catalog to page 7

適用チップ Applicable Insert

Open the catalog to page 8

適用チップ Applicable Insert ● Standard stock item ：

Open the catalog to page 9

適用チップ Applicable Insert

Open the catalog to page 10

適用チップ Applicable Insert ● Standard stock item ：

Open the catalog to page 11

コーティング直径許容差アクアドリルEX VF用チップ AQUA Drills EX VF Insert Applicable Holder Applicable Holder

Open the catalog to page 12

アクアドリルEX VF用フラットチップコーティング直径許容差 AQUA Drills EX VF Insert FLAT Type Applicable Holder 傾斜面平面へ一発加工が可能・ It is possible to be cutting once at slope and flat Cutting conditions Cutting Speed Feed Speed Step drilling Work Material Cutting Fluid Internal Coolant Please scan QR code by smart phones or mobile phones. You can watch videos of cutting scene WEB VIDEO:Drilling of a slope and ﬂat by TVFZ WEB VIDEO Drilling of H type steel by TVFZ Hole Depth

Open the catalog to page 13

切削条件 Recommended cutting conditions Work Material Structural Steels Carbon Steels Alloy Steels Feed （mm/min） Feed （mm/min） Stainless Steels Cast Irons Ductile Cast Irons Feed （mm/min） Feed （mm/min） Feed （mm/min） Warnings on using the drilling condition tables 1） Cutting conditions listed here use TVF Insert. 2） Adjust drilling condition according to the rigidity of machine or work clamp state. 3） When for hole depth more than 3xD, reduce the rotation and feed by 30%. 4） Use on internal coolant. Work Material Structural Steels Carbon Steels Alloy Steels Feed （mm/min） Feed （mm/min） Stainless...

Open the catalog to page 14

チップとホルダの選定ガイド Guide to selecting holders and inserts 使用ホルダ Holder 5Dを超える穴加工 Holes drilled over 5D Holes drilled up to 1.5D, flat bottom, inclined surface 1.5Dを超える傾斜面 Holes drilled over 1.5D, inclined surface Holes drilled over 1.5D, flat bottom, through hole Drilling flat bottoms Drilling a hole with a depth of 3D～8D Drilling guide holes Inclined surface Drilling bottom of hole Drilling a hole with a depth of 1.5D～5D Counter boring 抜け際の加工 Drilling through Drilling a hole with a depth of 3D～8D Drilling through *It is possible to drill the bottom of the hole or a through hole by using a...

Open the catalog to page 15

AQDEXVF チップの交換方法 Replacing inserts ホルダにはチップは付いておりません。別途お買い求めください。 Inserts are sold separately. The holder does not come with an insert. 　１．チップの取り外し Removing inserts ●クランプねじをスパナで取り外してください。 ●ねじ周辺に切りくずや汚れがある場合は、あらかじめ除去してください。 ●チップ取り外し後、チップ取り付け部およびねじ部の異物、汚れをエアーブロー等で除去してください。 ●Remove the clamp screw with a wrench. ●If there is any dirt or chips around the screw, remove them ﬁrst. ●After removing the insert, use compressed air to remove any dirt or foreign materials from the insert mount and the screw area. Screw area Insert mounting area Remove any chips and dirt. Use compressed air to...

Open the catalog to page 16

AQUA Drill EX VF Series 16Pages

Catalog excerpts

All NACHI America catalogs and technical brochures

AQUA Drill EX VF Series
16Pages