Catalog excerpts

Vacudigger - 1

Engine power:    min. 330 KW Total weight:    approx. 26 Tons Loading space:    12 m3, stainless steel Hydraulic suction arm: 9.25 mtr. with suction hose Suction hose diameter: 250 mm Air speed in suction hose:    max. 100 m/s Roots blowers:    2 x trilob Blower drive:    from the transfer gearbox Power consumption:    max. 300 KW Main filter:    Bia class M Fine filter: Ground control unit: Noise level: Lockable tool boxes: Support legs: Water pump: Air compressor: Pneumatic tools (optional): standard Bia Class M, Bia class H possible without lower value, with grounding reel and signal light approx. 80dB (A) 6 pieces 3 units, hydraulically telescopic capacity 45 ltr / min. at max. 150 bar, incl. 1000 litres water tank capacity 3 m3 / min., 7 bar pneumatic shovel, pressurised air injecting spring lance, pressurized blowing lance, pneumatic demolition hammer with chisels and 2 x 10 mtr. pressurized air hose possible. VacuDigger Naaktgeboren Rotterdam bv INNOVATIVE VACUUM EXCAVATOR TECHNOLOGY    Tel. 0031 - 10 - 462 04 55 3004 AD Rotterdam 3043 KV Rotterdam VacuDigger INNOVATIVE VACUUM EXCAVATOR TECHNOLOGY Excavator with a revolutionary combination of filter and Roots blower technology

Open the catalog to page 1
Vacudigger - 2

VacuDigger Driving and working with the VacuDigger The VacuDigger can drive hydrostatically. This drive is built into the transfer gearbox of the power train. The transfer gearbox also drives the roots blowers. Simultaneous sucking while hydrostatic driving by means of remote control. The VacuDigger is equipped with a digital modular CAN-bus control system with a remote control that can activate all required functions, such as movements of the suction arm, suction system, dumping, hydrostatic driving and steering. The VacuDigger Technology For safely and rapidly sucking away (contaminated)...

Open the catalog to page 2

All Naaktgeboren Rotterdam B.V. catalogs and technical brochures