Vacu-Press® Max-Loader PLUS

Product catalog summary

Overview
The Vacu-Press Max-loader Plus is an industrial double-axle semi-trailer with a steering axle, designed for the suction, blowing, and transportation of sand, gravel, substrates, and liquids. It is equipped with either an Aerzen blower or screw-compressor and powered by a Caterpillar diesel engine.

Features

Stainless steel tank with a net volume of approximately 20 m³.
Capable of suction and blowing of dry products and optionally liquids.
Suction capability with a 96% vacuum and blowing pressure of 1.8 bar using a screw compressor.
Automatic gearbox with 2 gears and hydraulic clutch for enhanced performance and fuel efficiency.
Low noise level at approximately 75 dB(A).
Low unladen weight of approximately 15,500 kg.
Main filter with 26 cartridges covering a surface area of 26 m².
Stainless steel safety filter with BIA-approved filter cartridge.

Specifications

Tank: Stainless steel with a diameter of 2,000 mm.
Capacity: Filter compartment - 1.5 m³, Material compartment - approximately 20 m³.
Total dimensions: Length - 9,200 mm, Height - 3,900 mm.
Weight: Unladen - 15,500 kg, Permissible total - 39,000/47,000 kg, Loading capacity - 16,000-24,000 kg.
Semi-Trailer: Features 2 air-axles with air suspension and a rear operated steering axle. Tandem set capacity - 20,000 kg, Kingpin capacity - 18,000 kg.
Blower: Aerzen with a maximum capacity of approximately 8,000 m³/h, maximum pressure of 1.0 bar, and maximum vacuum of 950 mbar.
Screw Compressor: Aerzen with a maximum capacity of approximately 5,500 m³/h, maximum pressure of 1.8 bar, and maximum vacuum of 900 mbar.
Diesel Engine: Caterpillar C4 or C6.
Fuel Tank: Stainless steel with a capacity of 400 litres.

Catalog excerpts

Industrial double-axle semi-trailer with steering axle, developed especially for the suction, blowing and transportation of sand, gravel, substrates and liquids

Open the catalog to page 1

The Vacu-Press Max-loader Plus is a modern industrial double-axle semi-trailer with steering axle, developed especially for the suction, blowing and transportation of sand, gravel, substrates and liquids. The Vacu-Press Max-loader Plus is available with an Aerzen blower or screw-compressor. It is driven by a 4 or 6-cylinder Caterpillar diesel engine and an automatic gearbox with 2 gears and hydraulic clutch. This gearbox gives the Vacu-Press Max-loader Plus a higher suction and blowing capacity, while using less fuel. • Stainless steel tank with a net volume of approx. 20 m3 • Suction and blowing...

Open the catalog to page 2

Vacu-Press® Max-Loader PLUS

Vacu-Press® Max-Loader PLUS

Catalog excerpts

All Naaktgeboren Rotterdam B.V. catalogs and technical brochures