RESISTIVITY SENSOR # CS10 For 750II Resistivity Monitor/controllers Small size enables convenient installation and service. Dual O-ring seals used on all versions for high on-stream reliability. Plastic gland fitting allows removal and replacement without tools. • Economic Value • Small, Convenient Size • 100 psi at 100°C • General Purpose Use • Field Replaceable Wetted materials of construction are 316 stainless steel and Teflon ®*, with double O-ring seals at all points. The first EPR O-ring bears the brunt of process interface, allowing the second O-ring to maintain reliable sealing, free from chemical attack. An integral temperature element allows automatic compensation for maximum accuracy. Leads are 10 ft./3 meters standard. Process connections are made via a bored through swage 3/4” NPT fitting as standard. This fitting may be installed into a line or tank, or may be reversed and connected to a standpipe for use in a submersion configuration. The CS10 was designed primarily for use in pure water applications. Assembled Resistivity Sensor For more information, please visit our website at www.myronl.com * Teflon® is a registered trademark of DuPont. Water Quality Instrumentation Accuracy • Reli

Maximum Pressure/ 100 psi/6,9 bar at 100°C/212°F Temperature Ratings 200 psi/13,8 bar at 120°C/248°F with 316SS Fitting Wetted Materials: Insulator O-rings Electrodes Fitting Teflon® EPR 316 Stainless Steel standard, optional materials available upon request. Polypropylene, 316SS, or PVDF Compensation RT100 & RT1000 available upon request. Connections: Polypropylene Process Fitting Options Electrical Sensor Constant: Model CS10 CS10LS 1/2” and 3/4’’ NPT compatible with BSP 3/4” NPT Standard 1/2” NPT Stainless Steel 1/2” NPT PVDF Plain tinned wire ends, 22-24 gauge. Range Constant RESISTIVITY...