Catalogs >
Myron L Company >
LITHO-KIT™

LITHO-KIT™
2Pages

Catalog excerpts

RECOMMENDED TESTING METHOD Litho-Kits are available for the Ultrameter II6PHFCE, 512M5 and M6/PH DS/pDS Meters. ON-THE-SPOT TESTING The increasing use of alcohol-free and alcohol-reduced fountain solutions places greater importance on monitoring conductivity, pH and temperature. The easy-to-use Litho-Kit along with your Myron L instrument allows the ability to take these important tests. Litho-Kits are self-contained, quality control tools for fountain solutions when purchased with the Ultrameter II 6P or M6/PH Meter. FEATURES & BENEFITS of USING the LITHO-KIT with YOUR MYRON L INSTRUMENT • Increases Print Quality • Saves Time & Money • Saves Solutions • Saves Water • Choice of instruments • Includes 20 mm/8 in. long-stem thermometer • Includes plastic syringe to draw samples from remote pans Recommendations for checking fountain solution conductivity and pH are listed below. CONDUCTIVITY and pH Many of today's fountain solutions are pH buffered, so only small changes in pH are seen, even with large changes in solution strength. Testing solution conductivity is an accurate way to measure concentration. By using field-proven Myron L instruments, the most precise etch/ water mix can be quickly identified. On-the-spot measurements will allow further fine tuning during press runs. Although conductivity measurement is critical, controlling pH is also imperative. The pH of fountain solutions can affect sensitivity, plate-life, ink-drying, etc. Use of the Myron L instrument to maintain optimum pH and conductivity will result in consistent, high-quality printing. TEMPERATURE Because alcohol-free solutions are less viscous, it is highly recommended to regularly check the temperature during press runs. The Litho-Kit includes a 20 mm/8 in. long-stem thermometer to check the temperature of the solution in the fountain pan ... the most accurate place to test. AS SIMPLE TO USE AS 1-2-3 Step 1: Draw sample from pan with syringe. Step 2: Fill cell cup with syringe contents. Step 3: Push buttons to read conductivity and pH. MYROINI L* COMPANY. Water Quality Instrumentation Accuracy • Reliability • Simplicity

Open the catalog to page 1

LITHO-KIT SPECIFICATIONS PLK For M6/PH ULK For 6PIIFCE CLK For 512M5 Case Hard foam-lined plastic carry case: 13.6 L x 10 W x 5.4 D in./ 346 L x 254 W x 137 D mm Syringe samples (35 cc) for drawing solution Thermometer 20 mm/8 in. stem; 4-52°C/25-125°F range; ±1% accuracy Conductivity Standard Solution Type 442-3000; 2 oz. pH Buffer Solutions (Model PLK & ULK only) -4, 7, 10 pH; 2 oz. each ORP — ±1 mV Temperature — 0.1°C/F Accuracy: Conductivity — ±1% of reading TDS — ±1% of reading Resistivity — ±1% of reading pH — ±0.01 pH ORP — ±1 mV Temperature — ±0.1°C Automatic Temperature...

Open the catalog to page 2

LITHO-KIT™ 2Pages

Catalog excerpts

All Myron L Company catalogs and technical brochures

LITHO-KIT™
2Pages