ORP SENSOR: O94FPE Heavy-Duty, Preamplified ORP Sensors for 900 Series Multi-Parameter Monitor / Controllers ● Heavy duty, flat-tip sensor design resists fouling and abrasion. ● Built-in isolated preamp guarantees accurate, trouble free operation. ● Sensor body made from Ryton® for excellent temperature and chemical durability. ● Platinum ORP electrode. BENEFITS ● Superb Response Time. ● Double-Junction Reference Design. ● Sensor area is completely sealed to eliminate leaks1. ● ± 2000 mV Range. ● Double-ended NPT for simple in-line or submersion installations, independent of mounting orientation. DESCRIPTION Myron L® Company O94FPE ORP sensors are designed to operate exclusively with Myron L® Company’s 900 Series Multi-Parameter Monitor / Controller. Each sensor has a built-in preamplifier that guarantees accurate measurements by eliminating ground-loop problems and reducing the effects of cable capacitance and impedance. The P94FPE sensor body is made from durable Ryton® PPS (polyphenylene sulfide). Ryton combines excellent temperature tolerance with superb resistance to solvents and corrosive chemicals and has an inherent UL94 V-0 flammability rating without flame retardant additives. A double-ended, 3/4” NPT fitting makes this sensor easy to install in-line. Double-Junction Reference design means this sensor is perfect for more demanding applications. Because the external junction is made from polyethylene the O94FPE is perfect for harsher industrial environments where contamination of the junction is a concern. It works exceptionally well when measuring solutions with low ionic strength. abrasive and/or oily solutions. It is an excellent choice for more demanding applications, such as wastewater management, or when measuring the ORP of non-aqueous solutions. Standard cable length is 10ft. (3.05m) terminated with 6, tinned leads (5 signal; 1 shield) . A separate 5-pin terminal block included2. The O94FPE sensor uses a flat tip design that stays cleaner and resists damage better than the classic tip design when exposed to Back seal of sensor body at cable exit is not water tight. DO NOT completely submerge sensor. Shield drain and sensor ground share a terminal. For more information please visit our w

O94FPE Process Fittings: 3/4” NPT (front and back) Measurement Range: 1 Temperature and pressure range for ambient environment and immersion installations. Derated limits apply. 2 Maximum temperature and pressure for wetted sensor. NEUTRAL - SHIELD DRAIN (Shares a Terminal with Ground) ORANGE - Ground GREEN - V[- ] WHITE - RTD BLACK - SIGNAL OUT Conductor Count: 5 +Shield Drain Conductor Size: 24 AWG Copper braid over aluminum foil surrounds all conductors Custom and OEM models available All Myron L® Company ORP Sensors have a Six (6) Month Limited Warranty. If sensor fails to function normally,...