pH SENSOR: P94FBPE Heavy Duty, BNC Terminated pH Sensors for 900 Series Multi-Parameter Monitor / Controllers ● Heavy duty, flat-tip sensor design resists fouling and abrasion. ● Sensor area completely sealed to eliminate leaks1. ● Sensor body made from Ryton® for excellent temperature and chemical durability. BENEFITS ● Superb Response Time. ● 0-14 pH Range. ● Double-Junction Reference Design. ● Double-ended NPT for simple in-line or submersion installations, independent of mounting orientation. DESCRIPTION The Myron L® Company P94FBPE pH sensor is designed to connect to the BNC input of the Myron L® Company 900 Series Multi-Parameter Monitor / Controller. The P94FBPE sensor body is made from durable Ryton® PPS (polyphenylene sulfide). Ryton combines excellent temperature tolerance with superb resistance to solvents and corrosive chemicals and has an inherent UL94 V-0 flammability rating without flame retardant additives. A double-ended, 3/4” NPT fitting makes this sensor easy to install in-line or as a submersion sensor. Double-Junction Reference design means the sensor can withstand sensor poisoning in more demanding applications. Because the external junction is made from polyethylene the P94FBPE is perfect for harsher industrial environments where contamination of the junction is a concern. The P94FBPE sensor uses a flat tip design that stays cleaner and resists damage better than the classic bulb design when exposed to abrasive and/or oily solutions. It is an excellent choice for more Back seal of sensor body at cable exit is not water tight. DO NOT completely submerge sensor. demanding applications, such as wastewater management, or when measuring the pH of nonaqueous solutions. Standard cable length is 10ft. (3.05m). The sensor’s BNC connector is compatible with any high input-impedance, pH meter or monitor equipped to accept a BNC connector. For more information please visit our websit

1 Temperature and pressure range for ambient environment and immersion installations. Derated limits apply. 2 Maximum temperature and pressure for wetted sensor. Drawing not to scale Cable Type: RG-174 Coaxial; 26 AWG Custom and OEM models available All Myron L® Company pH Sensors have a Six (6) Month Limited Warranty. If sensor fails to function normally, return the unit to the factory prepaid. If, in the opinion of the factory, failure was due to materials or workmanship, repair or replacement will be made without charge. A reasonable service charge will be made for diagnosis or repairs due...