Catalogs >
Myron L Company >
DS/pDS METERS™

DS/pDS METERS™
2Pages

Catalog excerpts

With four conductivity ranges, this instrument is the ideal choice for a wide range of applications. ACCURATE READINGS IN 3 EASY STEPS 1 Rinse and fill cell cup Select Conductivity/TDS range Push button to indicate reading Our most popular pDS model features four conductivity ranges and a 2-12 pH range. • Boilers & cooling towers • Deionization • Reverse osmosis • Chemical concentrations • Printing fountain solutions • Swimming pools & spas • Water pollution control • Wastewater READINGS YOU CAN COUNT ON No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life. Myron L Company has two proven ways to measure such impurities. Our DS Meters™ provide fast, accurate, on-the-spot measurements of Total Dissolved Solids (TDS) or Conductivity. pDS Meters™ test Conductivity or TDS plus pH. Readings from their highly stable circuitry help assure product quality, prevent equipment damage and verify in-line instrumentation in a wide range of applications, some of which are listed above. Offers three very useful ppm/ TDS ranges and an internal standard for easy field calibration. RELIABILITY BUILT IN Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The user-replaceable pH electrode features a chemical-resistant, porous liquid junction. UNIQUE FIELD-TESTED DESIGN Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world. They’re lightweight and compact, yet Myron L’s DS and pDS Meters are also tough, with rugged, taut-band meter movements. Put our meters to the test. Even after years of rough field service, they’ll surpass your expectations of accuracy, reliability and simplicity. Water Quality Instrumentation Accuracy

Open the catalog to page 1

SPECIFICATIONS Ranges: Conductivity 1, 3, 4 or 5 depending on model (see table below) Readout 2% in. taut-band shock resistant meter Units of Measure1 Choice of parts per million (ppm) TDS or micromhos (uM)/microsiemens (uS) conductivity Accuracy: Conductivity ±2% full scale pH ±0.2 pH units Temperature Automatic (to 25°C/77°F) for conductivity Compensation samples between 10-71°C/50-160°F Calibration Conductivity Controls pH Zero and pH Gain Electrodes (built-in) Conductivity: Never need replatinizing pH: KCl gel-filled, field replaceable Cell Cup Chip and...

Open the catalog to page 2

DS/pDS METERS™ 2Pages

Catalog excerpts

All Myron L Company catalogs and technical brochures

DS/pDS METERS™
2Pages