Catalogs >
Myron L Company >
DS & pDS Meters

DS & pDS Meters
2Pages

Catalog excerpts

Water Quality Instrumentation Accuracy • Reliability • Simplicity READINGS YOU CAN COUNT ON No water supply is completely pure. Every industrial, commercial, or natural source contains dissolved solids or salts. These impurities contribute to scale, corrosion, poor taste, and environmental pollution that endanger animal and plant life. Myron L Company has two proven ways to measure such impurities. Our DS Meters™ provide fast, accurate, on-the-spot measurements of Total Dissolved Solids (TDS) or Conductivity. pDS Meters™ test Conductivity or TDS plus pH. Readings from their highly stable circuitry help assure product quality, prevent equipment damage and verify in-line instrumentation in a wide range of applications, some of which are listed above. RELIABILITY BUILT IN Breakage is one of the major causes of sensor failure in a typical pH or conductivity instrument. Myron L instruments provide maximum protection for both the pH and conductivity electrodes inside the cell cup. The user-replaceable pH electrode features a chemical-resistant, porous liquid junction. UNIQUE FIELD-TESTED DESIGN Our unique, durable, field-tested design has evolved over more than 40 years, making Myron L instruments among the most reliable and popular of their kind in the world. They’re lightweight and compact, yet Myron L’s DS and pDS Meters are also tough, with rugged, taut-band meter movements. Put our meters to the test. Even after years of rough field service, they’ll surpass your expectations of accuracy, reliability and simplicity. Rinse and fill cell cup Push button to indicate reading DS and pDS METERS Conductivity and pH for Professionals 1 Select Conductivity/TDS range 2 3 APPLICATIONS • Boilers & cooling towers • Deionization • Reverse osmosis • Chemical concentrations • Printing fountain solutions • Swimming pools & spas • Water pollution control • Wastewater ™ MADE IN USA EP-10 With four conductivity ranges, this instrument is the ideal choice for a wide range of applications. EP11/PH Our most popular pDS model features four conductivity ranges and a 2-12 pH range. 532T1 Offers three very useful ppm/ TDS ranges and an internal standard for easy field calibration. ACCURATE READINGS IN 3 EASY STEPS

Open the catalog to page 1

ACCESSORIES NIST Standard Solutions & pH Buffers All Myron L instruments are factory calibrated with Standard Solutions of known conductivity/TDS values and (when appropriate) with pH buffer values 4, 7 and 10. These solutions and buffers are traceable to the U.S. Government’s National Institute of Standards and Technology. Periodic recalibration with the appropriate Standard Solutions and pH Buffers will help maintain the accuracy of your instrument. See the table above for recommendations. Note: pH 7 Buffer is especially important and should be used every 1- 2 weeks. Porta-Kit with...

Open the catalog to page 2

DS & pDS Meters 2Pages

Catalog excerpts

All Myron L Company catalogs and technical brochures

DS & pDS Meters
2Pages