3/4" MNPT Fitting allows for easy installation Potted construction -No seals to leak Simple, reliable design for long life Available with or without automatic temperature compensation FDA approved materials BENEFITS • Economic Value • Small, Convenient Size • 75 psi at 60°C • General Purpose Use • Field Replaceable These sensors are designed for use in general purpose applications up to approximately 20,000 ^S/ppm. Open front end geometry resists clogging and reduces maintenance requirements to a minimum. DESCRIPTION Wetted materials of construction are ABS plastic, with 316 Stainless Steel electrodes. An integral temperature element provides for automatic temperature compensation on both the CSATC and CSAR. The thermowell containing the temperature sensing element in its tip is exposed directly to the fluid stream, assuring rapid response for maximum accuracy. Potted construction ensures sensor reliability and long service life. The sensor constant is 1.0. The ranges that can be achieved with these sensors are dependent on the model and range of instrument — up to 20,000 /vS/ppm is the normal maximum range of use. MYROINI L® COMPANY. Water Quality Instrumentation Accuracy • Reliability • Simplicity

Electrodes 316 Stainless SteelTemperature CSA: NoneCompensation CSATC: 10 KQ @ 25°C/77°FCSAR: 1000 Q RTD Connections: 3/4" NPT compatible with BSP Process 3/4" MNPTElectrical Plain tinned wire ends, 22-24 gauge.Sensor Constant: Model Range ConstantAll 0-10 to 0-20,000 pS/ppm 1.0* *Installation T-Fitting required (customer supplied). Note: Drawing Not to Scale Custom and OEM models available. LIMITED WARRANTY All Myron L conductivity sensors have a Two (2) Year Limited Warranty. If sensor fails to function normally, return the unit to the factory prepaid. If, in the opinion of the factory, failure...