CONDUCTIVITY SENSOR: CS952Conductivity Sensors for 900 Series Multi-Parameter Monitor / Controllers Model CS952 • Measurement range from 0 to 200,000 jS. Can be installed in-line, in a tank or as a submersion sensor1. Dual O-ring seals for long term, in stream reliability. Customized cell constant is verified on each sensor for best accuracy. BENEFITS •Low Cost /High Performance. • Compact Size. • Cable Lengths Up to 100ft Available. • Open-Well Temperature Sensor Measures Solution Temperature Directly. DESCRIPTION The Myron L® Company CS952 Conductivity sensor combines small size with a 10.0 cell constant and an extremely high measurement range (0 to 200,000 pS). This makes it ideal for a wide variety of challenging applications such as: RO systems, Desalinization, Wastewater Management, and Chemical Manufacturing. The 3/4" NPT process connection is made from 316 stainless steel. The non-wetted portion of the CS952 is also 316 stainless steel, to which a 3/4” swage-style fitting can be attached, allowing the sensor to be inserted into a standpipe for use in submersion applications1. The wetted portion of the CS952 is made from CPVC (chlorinated polyvinyl chloride) which can withstand higher temperatures than standard PVC, but like PVC, is safe for the use with potable water. The CS952 sensor is completely encapsulated and feature a dual O-ring seal design that ensures long life under demanding conditions. The outer O-ring bears the brunt of environmental attacks allowing the inner O-ring to maintain a reliable seal. The thermo well containing the built-in PT1000 RTD is exposed directly to the measurement stream, assuring rapid automatic temperature compensation2 for maximum accuracy. Standard cable length is 10ft. (3.05m) terminated with 5, tinned leads (4 signal; 1 shield; separate 5-pin terminal block included). It is also available with optional 25ft (7.6m) or 100ft (30.48m) cables. For more information please visit our website at www.myronl.com 1 Sensor back seal at cable exit is not water tight. ALWAYS mount the sensor in a standpipe for submersion applications. 2 Temperature compensation can be deactivated to meet USP (United States Pharmacopoeia) requirements. MYRON L® I COMPANYJ Water Quality Instrumentation Accuracy • Reliability • Simplicity

SPECIFICATIONS: CS952 Measurement Range: 0 µS to 200,000 µS Nominal Cell Constant: 10.01 Sensor Body: 316 Stainless Steel Insulator: CPVC Electrodes: 316 Stainless Steel . Dual O-rings: EPR Temperature Sensor: PT1000 RTD Temperature - Pressure: 0 - 95 °C (32 - 203 °F) @ 0 - 100 PSIG (6.9 bar) Physical Connection & Mounting: 3/4” NPT: In-line: May be installed in any orientation. Immersion: Requires a standpipe and coupler. Electrical Connection (Standard): 10 ft. (3.05 m) long Shielded Cable: 22 AWG, 4 leads + Shield Drain Wire 5-pin Terminal Block Included. 1Actual Cell Constant for each sensor...