750 Series II: Conductivity/TDS Monitor/controller
2Pages

{{requestButtons}}

Catalog excerpts

750 Series II: Conductivity/TDS Monitor/controller - 1

BENEFITS: • Affordable • Ease of Operation • Low Maintenance • Ensures Product Quality APPLICATIONS: • Reverse Osmosis • Process Control • Seawater Desalination • Waste Treatment • Food Processing • Plating • Power Plants • Laboratories • Printing • Aquaculture • Agriculture • Environmental Studies • Medical • Boilers (250 psi @ 205°C) • Cooling Towers FEATURES: • 34 Conductivity/TDS ranges: 0-1 microsiemens/ppm to 0-200 millisiemens/ppt • Choice of 3% digit display or analog meter • Automatic temperature compensation to 25°C • Isolated 0-10 VDC Recorder Output standard • IP65/NEMA 4X water resistant and corrosion proof enclosure • Built-in electronic calibration • Single setpoint/alarm • Adjustable setpoint hysteresis • Solid State 24 VDC Output • 10 amp relay operates on choice of increasing or decreasing reading • LEDs show “above/below” Alarm/ control status • Push-to-test setpoint check • Internal setpoint discourages unauthorized adjustment • Selectable 115/230 VAC • Unique, easily installed sensor Options include: • Second Alarm/control Module • 4-20 mA Isolated Output • Piezo Electric Alarm • 3% or 4% Digit Backlit Display • Temperature Module • 24 VAC Isolated Power Supply The unique circuitry of the 750 Series II Conductivity Monitor/controllers guarantees accurate and reliable measurements. Drift-free performance is assured by “field proven” electronics, including automatic DC offset compensation and highly accurate drive voltage. Since temperature compensation is at the heart of accurate water measurement, all Myron L Monitor/controllers feature a highly refined and precise TC circuit. This feature perfectly matches the water temperature coefficient as it changes. All models corrected to 25°C. The TC may be disabled to conform with USP requirements. Built-in electronic calibration allows for fast quality checks without standard solutions. (Note: for maximum system accuracy standard solutions are recommended). A push-to-test button makes setpoint checks easy, while the internal alarm set discourages unauthorized adjustments. Standard on all controller models is a heavy-duty 10 amp output relay, operating on either increasing or decreasing readings. Bright green/red LEDs indicate above or below setpoint readings. All 750 Series II models feature an IP65/ NEMA 4X water resistant and corrosion-proof rated enclosure. Compact in size at 152 x 122 mm/6 x 4.8 in., they are suitable for panel, bench or surface mounting. Additional options include a 3 Sensor Input Switch and/or a 3 Range Switch and a Remote Alarm™ model RA. For more information, visit our website at www.myronl.com CUSTOM & OEM MODELS AVAILABLE MYROINI L® COMPANY. Water Quality Instrumentation

Open the catalog to page 1
750 Series II: Conductivity/TDS Monitor/controller - 2

These reliable sensors feature an integral temperature sensor to ensure accurate and rapid automatic temperature compensation. The sturdy polypropylene bushing is modular for easy inexpensive replacement. Several alternatives for the metal portion of the sensor are available, depending on the demands of the application. CS51LC sensors (0.1 constant) are used for 5 and below. CS51 sensors (1.0 constant) are used between 0-10 and 0-20,000. CS52 sensors (10.0 constant) are used above 20,000. Low cost, low temperature, low pressure sensors available upon request. See 750II Sensor Selection...

Open the catalog to page 2

All Myron L Company catalogs and technical brochures

  1. POOLPRO™

    4 Pages

  2. RO METERS™

    2 Pages

  3. POOLMETER™

    2 Pages

  4. LITHO-KIT™

    2 Pages

  5. CTCII™

    2 Pages

  6. TECHPRO

    2 Pages

  7. PoolMeter

    2 Pages

  8. POOLPRO

    4 Pages

  9. AGRI-METERS

    2 Pages

  10. AG-STIK

    2 Pages

  11. aquaswitch

    2 Pages