VACUUM SYSTEM
VACUUM SYSTEM
This document provides technical specifications and details for the Venturi Vacuum System, a vacuum dent pulling system designed for rough straightening of large dents using Venturi-effect technology. It includes two main configurations: the Innertial Hammer Version and the Pulling Tower Version.
- Venturi Vacuum System: Utilizes compressed air to generate a vacuum for secure grip during dent repair.
- Equipment Includes: Set of 3 vacuum cups (diameters: 75 mm, 100 mm, 125 mm), 2 pneumatic silencers, and a valve for precise air flow control.
- Designed for fast and effective interventions.
- Features a 2 kg sliding impact mass on linear bearings and a 500 mm long stainless steel rod.
- Technical Data: Sliding hammer weight is 2 kg (4.41 lb), compressed air inlet is 1/4” UNI, packaging dimensions are 60 x 15 x 15 cm (4.2 kg).
- Designed for use with No. 4 and No. 6 pulling towers.
- Includes an eye bolt compatible with the tower hook.
- Technical Data: Compressed air inlet is 1/4” UNI, packaging dimensions are 19 x 19 x 19 cm (1.6 kg).
Available separately, including small, medium, and large suction cups with incoming pressure requirements of 6÷8 Bar.
MWM Srl, via Toscana, 2/A, 40069 Zola Predosa (BO) Italia. For support and information, contact [email protected] or call +39 3426452430.
Catalog excerpts
STEEL ALUMINIUM PDR SMART PLASTIC TYPE WELDING MACHINE · CONSUMABLE TROLLEY · WORKSTATION · CASE · TIPS EQUIPMENT · COMPLEMENT · INDUCTOR AREA BODY UNDERBODY DAMAGE MINOR MEDIUM EXTENDED VACUUM SYSTEM INNERTIAL HAMMER VERSION PULLING TOWER VERSION Vacuum dent pulling system developed for rough straightening of large dents. The Venturi-effect technology generates vacuum through the powerful flow of compressed air, ensuring a quick and secure grip during dent repair operations. INNERTIAL HAMMER VERSION - 8003700 Configuration designed for fast and effective interventions. - 2kg sliding impact mass on linear bearings - Stainless steel rod, 500 mm long EQUIPMENT • Set of 3 vacuum cups (ø 75 mm – ø 100 mm – ø 125 mm ø 2 15/16” – ø 3 15/16” – ø 4 15/16”) • Set of 2 pneumatic silencers • Valve for precise control of the compressed-air flow SMALL SUCTION CUP DIAMETER INCOMING PRESSURE PULLING TOWER VERSION - 8003288 Specifically designed for use with No. 4 and No. 6 pulling towers. - Eye bolt compatible with the tower hook MEDIUM SUCTION CUP DIAMETER INCOMING PRESSURE LARGE SUCTION CUP DIAMETER INCOMING PRESSURE ACCESSORIES AVAILABLE SEPARATELY INNERTIAL HAMMER VERSION TECHNICAL DATA SLIDING HAMMER WEIGHT PULLING TOWER VERSION TECHNICAL DATA COMPRESSED AIR INLET MWM Srl via Toscana, 2/A 40069 Zola Predosa (BO) Italia For support and information: [email protected] +39 3426452430
Open the catalog to page 1All MWM Srl catalogs and technical brochures
POCKET PLASTIC WELDER1 Page
WORKSTATION2 Pages
