Dentro LRX Rugged On-line Scanner brochure
8Pages

Dentro LRX Rugged On-line Scanner On-line Visualization of Embedded Defects and Material Properties 3 Key Features ➊ Contactless Monitoring of the Entire Material ➊ Improve your Production Process ➋ Water, Dust and Temperature Resistant ➌ Operates with Non-ionizing Microwave Transmission ➋ Peak Performance in Harsh Environment ➌ Easy & Safe to Operate

Control and Optimize your Production Process Dentro LRX is a scanner that provides a full cross-sectional analysis of material on a continuous production line. It uses electromagnetic waves to reveal physical parameters (physical composition, moisture content, density, ...) or material defects (inclusions, wet pockets, knots in wood, leather hide defects, ...). The electromagnetic waves are transmitted through the entire thickness of the inspected material. Dentro LRX does not require contact between the sensors and the material in motion. It offers an excellent resolution (centimeter) and...

f Material Discrepancy Detectior Defective materials automatically scrapped: connected to a marking/ejection system, products that do not meet quality requirements can be scrapped automatically Decrease damage on production line Decrease customer complaints f Material Properties Monitoring Material properties continuously monitored on the production line: refine the average value necessary to ensure production parameters, such as moisture content 71 Save energy needed to produce the material 71 Mitigate distribution of the material Process Tracking Dentro LRX provides several advanced...

Peak Performance in Harsh Environments entro gets rugged with water, D dust and temperature resistance This new rugged version can adapt to highly demanding industrial environments: At every design stage, special attention has been given to dust, water, vibrations and temperature constraints. Each and every component has been developed, tested and integrated with industrial environments in mind. All instrumentation is protected by an uninterruptible power supply system. The instrumentation cabinet contains the signal generating and receiving systems, as well as a computer for data...

Easy & Safe to Operate entro LRX is easy to install on D any existing production line It's non-intrusive Dentro LRX can be mounted directly on the production line. It can easily be positioned between two conveyors. As there is no contact between the measurement system and the produced material, the system does not interfere with the production process. It's modular Dentro LRX is built in 64 cm (25 in) modules. Up to eight modules can be added (up to 5.12 m/16.8 ft) in order to fit the width of the production line. ➌ Control alarms and scrapping systems The Dentro software can control most...

f Dentro LRX is safe: it operates with non-ionizing microwave The system uses an electromagnetic field in the micro- wave frequency range. The level of emission is very low - no safety zone or special precautions are required. Dentro LRX's electromagnetic field emission level complies with the reference exposure level for workers - stipulated by the International Commission on Non-Ionizing Radiation Protection (ICNIRP). RADIO M MICROWAVE M INFRARED ULTRAVIOLETM X-RAY M GAM MA RAYS

How it works The electromagnetic field is projected through the material from the transmitting antenna located above the production line. The sensor array, located underneath the material, measures the resulting electromagnetic field phase distribution. Sharp and isolated deviations in the measured field indicate local defects in the material, such as pockets of moisture. Material properties are continuously calculated from the difference between the measured field and a previously performed calibration measurement with no material present in the system. Applications Discrepancies that can...

CONTACT US: North America ORBIT/FR Corporate Headquarters 506 Prudential Road Horsham, PA 19044, USA Tel: +1 215 674 5100 Fax: +1 215 674 5108 MVG USA 2105 Barrett Park Dr., Suite 104 Kennesaw, GA 30144, USA Tel: +1 678 797 9172 Fax: +1 678 797 9173 About Microwave Vision Group (MVG) MVG is an innovative high-tech company, specialized in the design and production of real-time scanner systems for electromagnetic fields. For over 20 years, MVG has developed measurement systems based on its patented multi-probe technology (networks of electronically-scanned sensors). MVG’s customer...