These transformers are made according to norms IEC60076/IEC726 and • have compact structure • are cost-effective • are of temperature class F (155ºC) On request transformers can also be made according to norms such as DNV or LRS. 7,5kVA single-phase medical isolation transformer Transformers have been designed to be cost-effective. Design methods allow the smallest possible size and lightweight construction. All materials used are of the highest quality and from certified suppliers. Custom made water-cooled 50kVA single-phase transformer 1 PHASE TRANSFORMERS eco model 6.3 - 630kVA Transformers have been built to minimize load losses. The advantage with ECO-transformer is low load losses, low operating temperature and small magnetic stray field. Also the inrush current is lower than in POWERmodel. All this has been achieved by decreasing the temperature rise and magnetic flux density in the transformer. All materials used are of the highest quality from certified suppliers. ECO-transformers have lower operating costs than POWERtransformers. • IEC60076/IEC726 (on request also: DNV, LRS...) • Raw materials of temperature class F (155ºC) • Low loss construction Isolation transformer of XH series POWER TRANSFORMERS 1 PHASE TRANSFORMERS power model 6.3 - 630kVA Muuntosähkö Oy - Trafox FINLAND - ESTONIA - CHINA P.O. Box 10, FI-00621 Helsinki, tel. +358 207 933 700, fax. +358 207 933 746, www.trafox.fi, [email protected]

3 PHASE TRANSFORMERS power model 10 - 1.000kVA Single- and three-phase low voltage transformers: Single- and three-phase distortion suspension transformers: Power: 6.3 kVA...1,000 kVA Voltage: max. 1,000 V Enclosure: IP00...IP34, others on request. Cooling: Free air cooling(AN), forced air cooling (AF) also available. All the raw materials used in our transformers can be recycled. Transformers can be custom manufactured. Please ask for a quotation. These transformers are used to separate sensitive electronic devices or demanding electrical networks from high frequency disturbances, high ground...