Original Material "S" plus+® white ESD

Product catalog summary

Manufacturer Information
Murtfeldt Kunststoffe GmbH & Co. KG, located in Dortmund, Germany, is the manufacturer of the product. Contact details include phone, fax, email, and website information.

Product Details
The product is a technical semi-finished item available in sheet and rod forms, primarily composed of Ultra High Molecular Weight Polyethylene (UHMW-PE), stabilisers, and additives. It is classified as an article under REACH regulations.

Product Features
The product is firm, natural in color, and odorless. It has a crystalline melting point between 135 – 138 °C, an ignition temperature of approximately 350 °C, and a density of 0.93 g/cm³.

Handling and Storage
No special handling instructions are required, and it can be machined with commercial tools. It should be stored horizontally and protected from UV exposure.

Fire Fighting Measures
In case of fire, suitable extinguishing media include water, foam, dry powder, or carbon dioxide (CO2).

Disposal References
Disposal should be in accordance with local regulations, either through recycling or at a dumpsite. Waste codes include 12 01 05 for plastic shavings/turnings and 20 01 39 for separately collected plastic fractions.

Transport Information
The product is not classified as a dangerous good under transport regulations but should be secured against slipping during transport.

REACH Information
According to EC directive 1907/2006 EC (REACH), the product is defined as an article not subject to registration.

Other Information
The information provided is based on current knowledge and is intended to offer general notes on the product and its safety requirements, without guaranteeing specific properties.

Catalog excerpts

Original Material "S" plus+® white ESD-1

Product Handling Information Sheet [PHIS] Original Material "S" plus+® white ESD Murtfeldt Kunststoffe GmbH & Co. KG Heßlingsweg 14-16 D-44309 Dortmund/ Germany Fon: +49 231 20 60 90 Fax: +49 231 25 10 21 E-Mail: [email protected] Internet: www.murtfeldt.com 2. Product Details Product: technical semi-finished product (sheet, rod) Main Components: Ultra High Molecular Weight Polyethylene (UHMW-PE), stabilisers, additives 3. Product Features Form: Crystalline Melting: Flash Point: Ignition Temperature: Murtfeldt Kunststoffe GmbH & Co.KG Heßlingsweg 14-16 D-44309 Dortmund [email protected] www.murtfeldt.com Last updated: october/2020 © Murtfeldt Kunststoffe GmbH &

Open the catalog to page 1

Original Material "S" plus+® white ESD-2

Product Handling Information Sheet [PHIS] Original Material "S" plus+® white ESD 4. Handling and Storage Handling: no special instructions; can be machined with commercial tools horizontally, protected against UV 5. Fire Fighting Measures Suitable extinguishing media: water, foam or dry powder, carbon dioxide (CO2) Recycling or dumpsite in accordance with local regulations Waste code / waste designations according to EWC: 12 01 05 plastic shavings / turnings 20 01 39 plastics of separately collected fractions No dangerous good according to transport regulations; secure against slipping 8. Information...

Open the catalog to page 2

Original Material "S" plus+® white ESD

Original Material "S" plus+® white ESD

Catalog excerpts

All Murtfeldt catalogs and technical brochures

Archived catalogs