Data sheet HEAVYLINE MP 62.2 MP 62.3

GLIDING SHOES FOR LONGER SERVICE LIFE BROAD INTERIOR LAYOUT FLEXIBLE CHAIN BRACKET PLASTIC OR ALUMINUM VERSION TECHNICAL DATA Loading side Inside and outside bend Available interior widths With plastic crossbar 93.0 – 518.0 mm With aluminum crossbar / With aluminum cover 72.0 – 600.0 mm / 40.0 – 600.0 mm

MP 62.2 OPEN / MP 62.3 CLOSED TECHNICAL SPECIFICATIONS 150.0 m Travel distance self-supporting Lf max. Travel distance vertical, hanging Lvh max. Travel distance vertical, standing Lvs max. Travel distance gliding Lg max. Contact our engineering department to meet any higher requirements: [email protected] MATERIAL PROPERTIES Standard material Service temperature Gliding friction factor Static friction factor Fire classification Other material properties on request. SHELVING SYSTEM Gliding shoes CHAIN BRACKET GUIDE CHANNELS STRAIN RELIEF Flexible chain bracket VAW Steel galvanized/stainless...

ORDER KEY Type code MP 62.2 open Crossbar in outside bend Crossbar in inside bend Opens on inside and outside bend MP 62.3 closed Cover in outside bend Cover in inside radius Opens on inside and outside bend Inside width Outside width Inside width Outside width Crossbar variant Plastic, full-ridged with bias Polyamide (PA): standard (PA/black) Plastic, full-ridged without bias Polypropylene (PP/blue) (upon request) Plastic, half-ridged with bias ESD (PA/light gray) (upon request) Plastic, half-ridged without bias Special version (upon request) Aluminum full-ridged with bias Aluminum full-ridged...

Aluminum covers: Aluminum crossbars can be supplied in 1 mm width sizes for inner widths from 40.0 mm – 600.0 mm. If crossbar strain relief plates (RS-ZL) are to be deployed in the chain brackets, take standard inside widths into account. For detailed information, please consult the corresponding product documentation. Aluminum crossbars: Aluminum crossbars can be supplied in 1 mm width sizes for inner widths from 72.0 mm – 600.0 mm. Crossbar connector and crossbar strain relief plate: Once inside widths exceed 9.69 in (243 mm), we recommend the deployment of crossbar connectors (RSV). Crossbar...

MP 62.2 OPEN / MP 62.3 CLOSED DETERMINING THE CHAIN LENGTH The fixed point of the energy chain should be connected in the middle of the travel distance. This arrangement gives the shortest connection between the fixed point (FP) and the moving bracket and thus the most efficient chain length. Chain length calculation = L/2 + π * R + E ≈ 1 m chain = 10 links, 100.0 mm each E L R T = Distance between entry point and middle of travel distance = Travel distance = Radius = Grid 100.0 mm INSTALLATION DIMENSIONS The moving end chain bracket is to be screw fixed at height HMA for the respective radius....

MP 62.2 OPEN / MP 62.3 CLOSED MP 62.2 REARWARD RADII Side links with rearward radius allow movements in both directions. This is intended for rotating movements and lowered chain brackets. Note: This type of chain has different chain links for the left or right side! Rotation movements are only possible with open variants. Rotating movement HEAVYLINE PLASTIC CROSSBAR The crossbars connect the two side runs of the energy chains. The crossbar length is synonymous with the inside width of the energy chain. MP 62.2 open / MP 62.3 closed Data sheet

MP 62.3 PLASTIC COVER The covers connect the two side runs of the energy chain. The cover length is synonymous with the inside width of the energy chain. Installation site Outside bend Inside bend Outside bend Inside bend Outside bend Inside bend Outside bend Inside bend Outside bend Inside bend Outside bend Inside bend Outside bend Inside bend GS 62.2 GLIDING SHOE In the case of energy chains, gliding shoes are used in a horizontally sliding installation mode (the upper run of the chain glides on the lower run). The gliding shoes are set onto the side links on the interior bend instead of the...

KA 62.1 FLEXIBLE CHAIN BRACKET with socket with socket with thread with thread This chain bracket offers universal connection options (top, bottom and front) and is attached to the ends of the chain like a side link. This allows the chain to move right up to the bracket. Each chain r equires one male and one female bracket. M8 screws are used to secure the brackets in place. Extrusion-coated metal bushes with either a through-hole (-FB) or a threaded hole (-FG) ensure the permanent, high-strength transmission of even extreme forces onto the cable drag chain. ASSEMBLY INSTRUCTION FB/FG FLEXIBLE...

BS-5 BRACKET BAR Large-diameter conduits are routed securely by using a bracket bars (BS). The bracket bar can be installed on both the inside or outside bend. The bracket bar support (BSH) is used to attach the bars to PowerLine series crossbars. Two bracket bar supports are required for each bar. The mounting on the aluminum or plastic covers or on the crossbars of the HeavyLine series is carried out with the help of the mounting set bracket bar RS-5/RS-7. One mounting set is required per bracket bar. Inner chain width min. mm TR 62 SEPARATOR We recommend that separators be used if multiple...

The shelf RBD creates a horizontal division over the entire inner width of the chain link. When used together with the TRT separator, an additional vertical division can be realized. MP 62.2 open / MP 62.3 closed Data sheet

CHAIN BRACKET COVER D6 Self-locking covers close the side mounting window on the flexible chain bracket (KA-FB/FG). MP 62.3 CHAIN BRACKET CANOPY Constructed from aluminum, the canopies for the flexible chain bracket (KA-FB/FG) ensure a continuously closed system for chains with covers. Canopy for chain bracket, fixed point outside bend: Type and order number configurator Type: Order No.: Inside width Inside width Inside width Inside width Inside width Inside width Inside width Inside width Canopy for chain bracket, fixed point inside bend: Type and order number configurator Type: Order No.: Canopy...

For crossbars wider than 246 mm, we recommend the use of crossbar connectors. These prevent deformation to the crossbar under large amounts of additional weight of the chain assembly. Crossbar connector Crossbar connector Crossbar connector for aluminum crossbars RS-ZL-7 CROSSBAR STRAIN RELIEF Fixed integrated crossbar strain relief plates in the chain brackets. Accommodated to all widths of the crossbars, up to 9.66 in (256 mm) in size. May be assembled on the inside and outside bends at both chain endings. Crossbar strain relief plate Crossbar strain relief plate Crossbar strain relief plate...