MP 35
9Pages

{{requestButtons}}

Catalog excerpts

MP 35 - 1

Cable drag chain systems MP 35

Open the catalog to page 1
MP 35 - 2

MP 35OPEN • METAL CHAIN BRACKET • LOW-COST VARIANT Loading side Inside bend Available interior widths With plastic frame bridge 62.0 - 150.0 mm © Murrplastik Systemtechnik GmbH • MP_35_~20171212~890280~efk_typ_35

Open the catalog to page 2
MP 35 - 3

murrplastik Travel distance gliding Lg max. Contact our engineering department to meet any higher requirements: efk@murrplastik.de MATERIAL PROPERTIES Standard material Other material properties on request. SHELVING SYSTEM CHAIN BRACKET GUIDE CHANNELS © Murrplastik Systemtechnik GmbH • MP_35_~20171212~890280~efk_typ_35

Open the catalog to page 3
MP 35 - 4

murrplastik ORDERING KEY Dimensions in mm [US inch] ORDER SAMPLE: 0350 02 062 070 0 0 1276 Frame bridge in outside bend, frame bridge in inside bend, can be opened from inside bend Inside width 62 mm; radius 70 mm Plastic bridge, full-ridged with bias, material black-coloured polyamide Chain length 1276 mm (22 links) © Murrplastik Systemtechnik GmbH • MP_35_~20171212~890280~efk_typ_35

Open the catalog to page 4
MP 35 - 5

SELF-SUPPORTING LENGTH The self-supporting length is the distance between the chain bracket on the moving end and the start of the chain arch. The installation variant FLg offers the lowest load and wear for the energy chain. The maximum travel parameters (speed and acceleration) can be applied for this variant. HS = Installation height plus safety HMA = Height of moving end connection FLg = Self-supporting length, upper run straight FLb = Self-supporting length, upper run bent LOAD DIAGRAM FOR SELF-SUPPORTING APPLICATIONS FLg Self-supporting length, upper run straight In the FLg range, the...

Open the catalog to page 5
MP 35 - 6

murrplastik EINBAUMASSE The moving end chain connection is to be screw fixed at height Hma for the respective radius. Concerning the installed dimensions, you must take into account whether the chain links are equipped with or without bias. For chain links without bias, the “Installed height without bias Hsk” value has to be taken into account. If the chain links are equipped with a bias, the value “Installed height with bias Hsv” has to be taken into account. © Murrplastik Systemtechnik GmbH • MP_35_~20171212~890280~efk_typ_35

Open the catalog to page 6
MP 35 - 7

murrplastik CHAIN BRACKET U-PART KA 35 The metal connection (U-section) is precisely adjusted to the respective chain width. It only needs to be snapped in the chain link. Please order one male and one female end bracket for each chain. The brackets should be fastened with M6 screws. MP 35 OPEN SEPARATOR TR 35 We recommend that separators be used if multiple round cables or conduits with differing diameters are to be installed. © Murrplastik Systemtechnik GmbH • MP_35_~20171212~890280~efk_typ_35

Open the catalog to page 7
MP 35 - 8

murrplastik SHELVING SYSTEM MP 35 The shelf must be used with a minimum of two separators to create a shelving system. The additional levels prevent cables from criss-crossing and minimise the friction between them. The shelves are matched to the available chain widths. A range of variable guide channel systems, constructed from aluminium or stainless steel sections, are available for this energy chain. The variable guide channel ensures that the energy chain is supported and guided securely. For help on choosing, please consult the chapter “Variable Guide Channel System”. © Murrplastik...

Open the catalog to page 8
MP 35 - 9

ASSEMBLY GUIDE CHANNEL VAW (ALUMINIUM / STAINLESS STEEL) All details given in our sales material prospectuses and catalogues as well as the information available online are based on our current knowledge of the products described. The electronic data and files made available by Murrplastik, particularly CAD files are based on our current knowledge of the product described. A legally binding assurance of certain properties or the suitability for a certain purpose can not be determined from this information. All information with respect to the chemical and physical properties of Murrplastik...

Open the catalog to page 9

All MURRPLASTIK SYSTEMTECHNIK catalogs and technical brochures

  1. MP 32

    16 Pages

  2. MP 3000

    10 Pages

  3. MP 20.2

    8 Pages

  4. MP 15

    8 Pages

  5. MP 14

    8 Pages

  6. MP 10.1

    8 Pages

  7. R-Tec Liner

    2 Pages

  8. Type PR/SV

    2 Pages

  9. Type USH/D

    2 Pages

  10. Type UH

    2 Pages

  11. Type EW

    2 Pages

  12. Cables

    84 Pages