MP 32.2, MP 32.3 Alu
17Pages

Cable drag chain systems MP 32.2, MP 32.3

• SLIDING BLOCKS FOR LONGER SERVICE LIFE • BROAD INTERIOR LAYOUT • FLEXIBLE CHAIN BRACKET • PLASTIC OR ALUMINIUM VERSION TECHNICAL DATA Loading side Inside and outside bend Available interior widths With plastic frame bridge 45.0 – 546.0 mm With Alu frame bridge / With Alu cover 67.0 – 600.0 mm / 43.0 – 600.0 mm 2 © Murrplastik Systemtechnik GmbH • MP_32_2_MP_32_3_~20171211

TECHNICAL SPECIFICATIONS Travel distance gliding Lg max. Contact our engineering department to meet any higher requirements: efk@murrplastik.de MATERIAL PROPERTIES Standard material Other material properties on request. ACCESSORIES MP 32.2 OPEN / MP 32.3 CLOSED GUIDE CHANNELS STRAIN RELIEF CHAIN BRACKET © Murrplastik Systemtechnik GmbH • MP_32_2_MP_32_3_~20171211~890280~efk_typ_32_2_3

Dimensions in mm [US inch] Type code Variation ORDER SAMPLE: 0322 30 045 080 0 0 1290 Frame bridge in outside bend, frame bridge in inside bend, can be opened from inside and outside bend Inside width 045 mm; radius 80 mm Plastic bridge, full-ridged with bias, material black-coloured polyamide Chain length 1290 mm (20 links) 1) for Variant 30 only 2) Reduced inner height, reduced max. cable diameter, see chain window drawing Page 2 4 © Murrplastik Systemtechnik GmbH • MP_32_2_MP_32_3_~20171211~890280~efk_typ_32_2_3

NOTE ON CONFIGURATION Aluminium frame bridges: Aluminium frame bridges can be supplied in 1 mm width sizes for inner widths from67.0 mm – 600.0 mm . made from plastic or aluminium. If frame bridge strain relief plates (RS-ZL) are to be deployed in the chain brackets, take standard inside widths into account. Aluminium covers: Aluminium covers can be supplied in 1 mm width sizes for inner widths from43.0 mm – 600.0 mm . For detailed information, please consult the corresponding product documentation. Crossbar connector and frame bridge strain relief plate: Once inner widths exceed 246 mm,...

murrplastik DETERMINING THE CHAIN LENGTH The fixed point of the energy chain should be connected in the middle of the travel distance. This arrangement gives the shortest connection between the fixed point (FP) and the moving consumer and thus the most efficient chain length. Chain length calculation = L/2 + n * R + E « 1 m chain =16 qty. x64.5 mm. E = distance between entry point and middle of travel distance L = travel distance R = radius P = Pitch64.5 mm The moving end chain connection is to be screw fixed at height Hma for the respective radius. For the installed dimension the...

murrplastik POWERLINE PLASTIC FRAME BRIDGE The frame bridges connect the two side runs of the energy chain. The frame bridge length is synonymous with the inside width of the energy chain. MP 32.2 OPEN / MP 32.3 CLOSED © Murrplastik Systemtechnik GmbH • MP_32_2_MP_32_3_~20171211~890280~efk_typ_32_2_3

MP 32.2 OPEN / MP 32.3 CLOSEDKA 32 FLEXIBLE CHAIN BRACKET This chain bracket offers universal connection options (top, bottom and front) and is attached to the ends of the chain like a side link. This allows the chain to move right up to the bracket. Each chain requires one male and one female bracket. M5 screws are used to secure the brackets in place. Extrusion-coated metal bushes with either a through-hole (-FB) or a threaded hole (-FG) ensure the permanent, high-strength transmission of even extreme forces onto the cable drag chain. We recommend that separators be used if multiple round...

MP 32.2 OPEN / MP 32.3 CLOSEDSEPARATOR TR 32.1 We recommend that separators be used if multiple round cables or conduits with differing diameters are to be installed. In connection with two separable shelf supports (RTT) with at least one end-to-end shelf (RB) the shelf becomes an easy to fill shelving system. The additional levels prevent cables from criss-crossing and minimise the friction between them. MP 32.2 OPEN / MP 32.3 CLOSED RB-5 SHELF In connection with at least two separable shelf supports (RTT), the shelf becomes a shelving system. The additional levels prevent cables from...

murrplastik RB-5 SHELF Type For frame bridges wider than 246 mm, we recommend the use of crossbar connectors. These prevent deformation to the frame bridge under large amounts of additional weight of the chain assembly. © Murrplastik Systemtechnik GmbH • MP_32_2_MP_32_3_~20171211~890280~efk_typ_32_2_3

murrplastik RE 32 H-SHAPED SHELF UNIT One-piece shelving system, the shelf cannot be varied in height. Self-locking covers close the side mounting window on the flexible chain bracket (KA-FB/FG). © Murrplastik Systemtechnik GmbH • MP_32_2_MP_32_3_~20171211~890280~efk_typ_32_2_3

MP 32.2 OPEN / MP 32.3 CLOSEDMP 32.3 CHAIN BRACKET CANOPY Constructed from aluminium, the canopies for the flexible chain bracket (KA-FB/FG) ensure a continuously closed system for chains with covers. Canopy for chain bracket, fixed point outside bend: Type and part number configurator Type: KA 32.1 FB/FG AB Inside width Cover for chain bracket fixed point inside bend: Type and part number configurator Type: KA 32.1 FB/FG IB Inside width Cover for chain bracket moving end outside bend: Type and part number configurator Type: KA 32.1 FB/FG AB Inside width Cover for chain...

murrplastik RS-ZL-5 FRAME RAIL TENSION RELIEF Type STRAIN RELIEF WITH STEEL FIX C-rails (galvanized) for permanent integration, for accommodating the Steel Fix bow clamps in the chain brackets. The bow clamps can take up to 3 cables and are suitable for C-rails with a groove width of 11 mm. Due to the design of the trough elements, a cable preserving cable guidance is ensured. May be assembled on the inside and outside bends at both chain endings. The overall height stated is a guide only. The actual height is, amongst other things, dependent on the diameter and the quality of the cable. A...

murrplastik STRAIN RELIEF WITH STEEL FIX Type © Murrplastik Systemtechnik GmbH • MP_32_2_MP_32_3_~20171211~890280~efk_typ_32_2_3