Cable drag chain systems MP 32

• PLASTIC OR ALUMINIUM VERSION • FLEXIBLE CHAIN BRACKET • BROAD INTERIOR LAYOUT TECHNICAL DATA Loading side Inside and outside bend Available interior widths With plastic frame bridge 45.0 – 546.0 mm With Alu frame bridge / With Alu cover 67.0 – 600.0 mm / 2 © Murrplastik Systemtechnik GmbH • MP_32__~20171212~8

CHAIN BRACKET TECHNICAL SPECIFICATIONS Travel distance gliding Lg max. Contact our engineering department to meet any higher requirements: [email protected] GUIDE CHANNELS MP 32 OPEN Standard material Other material properties on request. © Murrplastik Systemtechnik GmbH • MP_32_~20171212~890280~efk_typ_32

murrplastik ORDERING KEY Dimensions in mm [US inch] Type code Variation ORDER SAMPLE: 0320 30 045 080 0 0 1290 Frame bridge in outside bend, frame bridge in inside bend, can be opened from inside and outside bend Inside width 45 mm; radius 80 mm Plastic bridge, full-ridged with bias, material black-coloured polyamide Chain length 1290 mm (20 links) © Murrplastik Systemtechnik GmbH • MP_32_~20171212~890280~efk_typ_32 4

NOTE ON CONFIGURATION Aluminium frame bridges: Aluminium frame bridges can be supplied in 1 mm width sizes for inner widths from67.0 mm – 600.0 mm . product documentation. Crossbar connector and frame bridge strain relief plate: Once inner widths exceed 246 mm, we recommend the deployment of crossbar connectors (RSV). If frame bridge strain relief plates (RS-ZL) are to be deployed in the chain brackets, take standard inside widths into account. For detailed information, please consult the corresponding SELF-SUPPORTING LENGTH The self-supporting length is the distance between the chain bracket...

murrplastik DETERMINING THE CHAIN LENGTH The fixed point of the energy chain should be connected in the middle of the travel distance. This arrangement gives the shortest connection between the fixed point (FP) and the moving consumer and thus the most efficient chain length. Chain length calculation = L/2 + n * R + E « 1 m chain =16 qty. x64.5 mm. E = distance between entry point and middle of travel distance L = travel distance R = radius P = Pitch64.5 mm The moving end chain connection is to be screw fixed at height Hma for the respective radius. For the installed dimension the “Installed...

murrplastik POWERLINE PLASTIC FRAME BRIDGE The frame bridges connect the two side runs of the energy chain. The frame bridge length is synonymous with the inside width of the energy chain. MP 32 OPEN © Murrplastik Systemtechnik GmbH • MP_32_~20171212~890280~efk_typ_32

murrplastik KA 32 FLEXIBLE CHAIN BRACKET This chain bracket offers universal connection options (top, bottom and front) and is attached to the ends of the chain like a side link. This allows the chain to move right up to the bracket. Each chain requires one male and one female bracket. M5 screws are used to secure the brackets in place. Extrusion-coated metal bushes with either a through-hole (-FB) or a threaded hole (-FG) ensure the permanent, high-strength transmission of even extreme forces onto the cable drag chain. We recommend that separators be used if multiple round cables or conduits...

murrplastik RTT 32 SHELF SUPPORT, DIVISIBLE In connection with two separable shelf supports (RTT) with at least one end-to-end shelf (RB) the shelf becomes an easy to fill shelving system. The additional levels prevent cables from criss-crossing and minimise the friction between them. © Murrplastik Systemtechnik GmbH • MP_32_~20171212~890280~efk_typ_32

murrplastik RB-5 SHELF Type For frame bridges wider than 246 mm, we recommend the use of crossbar connectors. These prevent deformation to the frame bridge under large amounts of additional weight of the chain assembly. © Murrplastik Systemtechnik GmbH • MP_32_~20171212~890280~efk_typ_32

murrplastik BS -5 BRACKET BAR Large-diameter conduits are routed securely by using a bracket bar (BS). Installation is done on the frame bridges or the covers of the energy chain. The bracket bar can be installed on both the inside and outside bend. The bracket bar support (BSH) is used to attach the bars to PowerLine series frame bridges. Two bracket bar supports are required for each bar. © Murrplastik Systemtechnik GmbH • MP_32_~20171212~890280~efk_typ_32

murrplastik RS-ZL-5 FRAME RAIL TENSION RELIEF Type C-rails (galvanized) for permanent integration, for accommodating the Steel Fix bow clamps in the chain brackets. The bow clamps can take up to 3 cables and are suitable for C-rails with a groove width of 11 mm. Due to the design of the trough elements, a cable preserving cable guidance is ensured. May be assembled on the inside and outside bends at both chain endings. The overall height stated is a guide only. The actual height is, amongst other things, dependent on the diameter and the quality of the cable. A safety distance of 10 mm at the...

murrplastik STRAIN RELIEF WITH STEEL FIX Type MP 32/41 LOCK BUTTONTo increase the side stability, we recommend the use of lock “laying on the side (turned 90°) without support”.buttons during strong lateral acceleration or when installed Type © Murrplastik Systemtechnik GmbH • MP_32_~20171212~890280~efk_typ_32

murrplastik LOWERED FIXING POINT MP 32 It is sometimes necessary to lower the height of the moving attachment point. In such cases, modifications to the chain layout should be noted (e.g. extension of chain). Please contact our application engineers. © Murrplastik Systemtechnik GmbH • MP_32_~20171212~890280~efk_typ_32

murrplastik GUIDE CHANNEL VAW (ALUMINIUM / STAINLESS STEEL) IS A range of variable guide channel systems, constructed from aluminium or stainless steel sections, are available for this energy chain. The variable guide channel ensures that the energy chain is supported and guided securely. For help on choosing, please consult the chapter “Variable Guide Channel System”. Brass bushes guarantee long-lasting fastening without cold flow in the plastic. Version KA-FB: Integrated through-hole fastened down using screw and nut. Version KA-FG: Built-in threads allow for quick and easy on-site mounting, since...