MP 20.2
8Pages

Cable drag chain systems MP 20

• LOW-COST VARIANT • CHAIN BRACKET WITH INTEGRATED STRAIN RELIEF • FRAME BRIDGE WITH INTEGRAL HINGE TECHNICAL DATA Loading side Inside bend Available interior widths With plastic frame bridge 15.0 – 50.0 mm 2 © Murrplastik Systemtechnik GmbH • MP_20__~20171211~8902

TECHNICAL SPECIFICATIONS Travel distance gliding Lg max. Contact our engineering department to meet any higher requirements: efk@murrplastik.de MATERIAL PROPERTIES Standard material Other material properties on request. CHAIN BRACKET SHELVING SYSTEM GUIDE CHANNELS © Murrplastik Systemtechnik GmbH • MP_20_~20171211~890280~efk_typ_20

murrplastik ORDERING KEY Dimensions in mm [US inch] SAMPLE ORDER: 0202 02 025 048 0 0 770 Frame bridge in outside bend, frame bridge in inside bend, opens on inside bend Inside width 25 mm; radius 48 mm Plastic bridge, full-ridged with bias, material black-coloured polyamide Chain length 770 mm (22 links) 1) max. line diameter 13 mm 4 © Murrplastik Systemtechnik GmbH • MP_20_~20171211~890280~efk_typ_20

SELF-SUPPORTING LENGTH The self-supporting length is the distance between the chain bracket on the moving end and the start of the chain arch. The installation variant FLg offers the lowest load and wear for the energy chain. The maximum travel parameters (speed and acceleration) can be applied for this variant. HS = Installation height plus safety HMA = Height of moving end connection FLg = Self-supporting length, upper run straight FLb = Self-supporting length, upper run bent LOAD DIAGRAM FOR SELF-SUPPORTING APPLICATIONS FLg Self-supporting length, upper run straight In the FLg range, the...

murrplastik EINBAUMASSE The moving end chain connection is to be screw fixed at height Hma for the respective radius. For the installed dimension the “Installed height Hs” value has to be taken into account. © Murrplastik Systemtechnik GmbH • MP_20_~20171211~890280~efk_typ_20

murrplastik SEPARATOR TR 20 We recommend that separators be used if multiple round cables or conduits with differing diameters are to be installed. MP 20 OPEN GUIDE CHANNEL VAW (ALUMINIUM) A variable guide channel system, constructed from aluminium sections, is available for this energy chain. The variable guide channel ensures that the energy chain is supported and guided securely. For help on choosing, please consult the chapter “Variable Guide Channel System”. © Murrplastik Systemtechnik GmbH • MP_20_~20171211~890280~efk_typ_20

ASSEMBLY GUIDE CHANNEL VAW (ALUMINIUM) All details given in our sales material prospectuses and catalogues as well as the information available online are based on our current knowledge of the products described. The electronic data and files made available by Murrplastik, particularly CAD files are based on our current knowledge of the product described. A legally binding assurance of certain properties or the suitability for a certain purpose can not be determined from this information. All information with respect to the chemical and physical properties of Murrplastik products as well as...