MP 10.1
8Pages

{{requestButtons}}

Catalog excerpts

MP 10.1 - 1

Cable drag chain systems MP 10.1

Open the catalog to page 1
MP 10.1 - 2

• EASY (FILL) MECHANISM • CHAIN BRACKET WITH INTEGRATED STRAIN RELIEF • CAN BE EASILY SHORTENED AND LENGTHENED • VERY FLEXIBLE, HIGH TORSION TECHNICAL DATA Loading side Outside bend slitted Available interior widths With plastic frame bridge 6.0 – 41.0 mm 2 © Murrplastik Systemtechnik GmbH • MP_10_1__~20171211~8902

Open the catalog to page 2
MP 10.1 - 3

TECHNICAL SPECIFICATIONS Travel distance gliding Lg max. Contact our engineering department to meet any higher requirements: efk@murrplastik.de MATERIAL PROPERTIES Other material properties on request. CHAIN BRACKET 3 © Murrplastik Systemtechnik GmbH • MP_10_1_~20171211~890280~efk_typ_10_1

Open the catalog to page 3
MP 10.1 - 4

murrplastik ORDERING KEY Dimensions in mm [US inch] ORDER SAMPLE: 0101 22 006 018 0 0 1065 Frame bridge in outside bend, frame bridge in inside bend, slitted in outside bend Inside width 6 mm; radius 18 mm Plastic bridge, full-ridged with bias, material black-coloured polyamide Chain length 1065 mm (71 links) 1) max. line diameter 5 mm 4 © Murrplastik Systemtechnik GmbH • MP_10_1_~20171211~890280~efk_typ_10_1

Open the catalog to page 4
MP 10.1 - 5

SELF-SUPPORTING LENGTH The self-supporting length is the distance between the chain bracket on the moving end and the start of the chain arch. The installation variant FLg offers the lowest load and wear for the energy chain. The maximum travel parameters (speed and acceleration) can be applied for this variant. HS = Installation height plus safety HMA = Height of moving end connection FLg = Self-supporting length, upper run straight FLb = Self-supporting length, upper run bent LOAD DIAGRAM FOR SELF-SUPPORTING APPLICATIONS FLg Self-supporting length, upper run straight In the FLg range, the...

Open the catalog to page 5
MP 10.1 - 6

murrplastik EINBAUMASSE The moving end chain connection is to be screw fixed at height Hma for the respective radius. For the installed dimension the “Installed height Hs” value has to be taken into account. © Murrplastik Systemtechnik GmbH • MP_10_1 -20171211~890280~efk_typ_10_1

Open the catalog to page 6
MP 10.1 - 7

WIRE INSERTION AID murrplastik The wire insertion tool allows for quick and simple installation of cables and hoses into the cable drag chain. CHAIN BRACKET U-PART KA 10.1 The chain bracket is a fully plastic part. The bracket is precisely adjusted to the respective chain width and only needs to be snapped in at the chain link. Please order one male and one female end bracket for each chain. The brackets should be fastened with M3 screws. The cables or conduits may be fastened with cable ties on the integrated strain relief of the chain bracket. © Murrplastik Systemtechnik GmbH • MP_10_1....

Open the catalog to page 7
MP 10.1 - 8

ASSEMBLY CHAIN BRACKET U-PART KA 10.1 All details given in our sales material prospectuses and catalogues as well as the information available online are based on our current knowledge of the products described. The electronic data and files made available by Murrplastik, particularly CAD files are based on our current knowledge of the product described. A legally binding assurance of certain properties or the suitability for a certain purpose can not be determined from this information. All information with respect to the chemical and physical properties of Murrplastik products as well as...

Open the catalog to page 8

All MURRPLASTIK SYSTEMTECHNIK catalogs and technical brochures

  1. MP 35

    9 Pages

  2. MP 32

    16 Pages

  3. MP 3000

    10 Pages

  4. MP 20.2

    8 Pages

  5. MP 15

    8 Pages

  6. MP 14

    8 Pages

  7. R-Tec Liner

    2 Pages

  8. Type PR/SV

    2 Pages

  9. Type USH/D

    2 Pages

  10. Type UH

    2 Pages

  11. Type EW

    2 Pages

  12. Cables

    84 Pages