THE PROCESS OPTIMIZER Metal components are often transported with electromagnets that are controlled by transformers. When these transformers are switched off, some residual magnetism will remain. This is undesired because now the metal components will not disconnect from the electromagnets. Sometimes they stick to it and this can mess up the complete process. Murrelektronik‘s demagnetizer ensures that this doesn‘t happen. This cabinet component controls electromagnets with DC voltage. The magnetic force is controlled through an analog signal (0 to 10 V) from the control or with a separate set point adjuster. During the demagnetizing process the components disconnect consistently and quickly. There are no more problematic induction voltages or residual magnetism. MURRELEKTRONIK‘S DEMAGNETIZER ontrols electromagnets conveniently C ontrols the magnetic force of electromagnets C precisely with a 0...10 V analog signal witches off electromagnets in a safe and S controlled manner revents spindles in machine tools from P magnetizing Murrelektronik GmbH | Falkenstraße 3 | D-71570 Oppenweiler | Phone +49 7191 47-0 | Fax +49 7191 47-130 | [email protected] | www.murrelektronik

mMURR mm EIEKIRONIK stay connected MODEL OVERVIEW -*■ The DC magnet is magnetized with pulsing DC voltage It is demagnetized with p ulsing AC voltage LED display: • Magnetizing • Demagnetizing • Operating voltage • Short-circuit (only 446142) Murrelektronik GmbH | Falkenstrafte 3 | D-71570 Oppenweiler | Phone +49 7191 47-0 | Fax +49 7191 47-130 | [email protected] | www.murrelektronik.com