COMPACT ACTIVE BRAKE RECITIFIERS BRAKE FAST AND ACCURATELY Connect DC brakes easier with Murrelektronik‘s active brake rectifiers. Now the contactor and rectifier modules are combined! So far, brake components were installed seperately: in the control cabinet and on the motor’s terminal board. But now, with Murrelektronik‘s active brake rectifiers, both parts included in one compact component! The DC brakes are directly controlled from the control cabinet. The active brake rectifiers receive a signal from the PLC via a 24 V DC control input. A semiconductor switch that never wears out controls the rectified output voltage of the brake. USING ACTIVE BRAKE RECITIFIERS Conventional solutions include a switching device in the control cabinet and a rectifier module on the motor’s terminal board. Murrelektronik‘s active brake rectifiers replace both components. Motor Protection Switch Field Contactor Active Brake Rectifier Murrelektronik GmbH | Falkenstraße 3 | D-71570 Oppenweiler | Phone +49 7191 47-0 | Fax +49 7191 47-130 | [email protected] | www.murrelektr

mMURR mm EIEKIRONIK stay connected THE OPTIMUM SOLUTION FOR CONTROLLING DC BRAKES ■ For all standard mains voltages ■ Direct control via PLC ■ Very short switch-off times because of direct current switching ■ Suppression for the brake ■ Spring clamp terminals ■ Status LED Active Brake Rectifier Please contact us for individual consultation. Murrelektronik GmbH | Falkenstrafte 3 | D-71570 Oppenweiler | Phone +49 7191 47-0 | Fax +49 7191 47-130 | [email protected] | www.murrelektronik.com