Chip Monolithic Ceramic Capacitors for Automotive
66Pages

Cat.No.C03E-4 Chip Monolithic Ceramic Capacitors for Automotive

for EU RoHS Compliant • All the products in this catalog comply with EU RoHS. • EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment". • For more details, please refer to our website 'Murata's Approach for EU RoHS' (http://www.murata.com/info/rohs.html).

Part Numbering 2 Selection Guide of Chip Monolithic Ceramic Capacitors 4 for Automotive GCM Series 5 Capacitance Table 6 Temperature Compensating Type 8 High Dielectric Constant Type 10 Specifications and Test Methods 14 Package 19 !Caution (Storage and Operation Condition) 22 !Caution (Rating) 23 !Caution (Soldering and Mounting) 27 !Caution (Others) 33 Notice (Rating) 34 Notice (Soldering and Mounting) 35 Notice (Others) 38 Medium Voltage for Automotive GCM Series Low Dissipation Factor 39 Specifications and Test Methods 41 Medium Voltage for Automotive GCJ Series Soft Termination Type 45...

(Part Number) w qProduct ID wSeries GC J M Soft Termination Type Power-train, Safety Equipment Power-train, Safety Equipment Product ID Code Series GC q M e 18 r 8 t R7 y 1H u 102 i K o A37 eDimension (LgW) !0 D Code 0.6g0.3mm 1.0g0.5mm 1.6g0.8mm 2.0g1.25mm 3.2g1.6mm 3.2g2.5mm 4.5g3.2mm 5.7g5.0mm Dimension (LgW) 0201 0402 0603 0805 1206 1210 1812 2220 EIA 03 15 18 21 31 32 43 55 B C D E M N Q R X 1.25mm 1.6mm 2.0mm 2.5mm 1.15mm 1.35mm 1.5mm 1.8mm Depends on individual standards. A 1.0mm rDimension (T) Code 3 5 6 8 9 0.3mm 0.5mm 0.6mm 0.8mm 0.85mm Dimension (T) Continued on the following...

!0Package Code L D K J B C ø180mm Embossed Taping ø180mm Paper Taping ø330mm Embossed Taping ø330mm Paper Taping Bulk Bulk Case Package C D J K M GCM GCM GCM GCM GCJ/GCM GCM C0G C0G C0G U2J X7S, X7R X7S, X7R ±0.25pF ±0.5pF ±5% ±10% ±20% V5pF 6.0 to 9.0pF U10pF E12, 1pF Step * E12, 1pF Step * E12 Step E12 Step E6 Step E6 Step * E24 series is also available. Expressed by three figures. oIndividual Specification Code

Applications? GRM (X5R, X7R, Y5V etc.) 68pF–100ìF GNM 10pF–2.2ìF GRM (C0G) 0.1pF–0.1ìF GRM (U2J etc.) LLL 2200pF–10ìF LLA/LLM (From 1GHz) 0.01ìF–4.7ìF ERB (1MHz to 1GHz) 0.5pF–1000pF GJM (500MHz to 10GHz) 0.1pF–33pF GQM (500MHz to 10GHz) 0.1pF–100pF GMA 100pF–0.47ìF GMD 100pF–1ìF GRM (C0G, U2J) 10pF–10000pF GRM (C0G) 5pF–47pF GRM (X7R) 220pF–1ìF GR7 10000pF–47000pF GR4 100pF–10000pF Type GD 10pF–4700pF Type GF 10pF–4700pF Type GC 100pF–330pF Type GF 470pF–4700pF Type GB 10000pF–56000pF GA2 470pF–0.1ìF GCM (X7R etc.) 100pF–47ìF GCM (C0G etc.) 1.0pF–56000pF High Capacitance Array (2 or 4...

for Automotive GCM Series n Features 1. The GCM series meet AEC-Q200 requirements. 2. Higher resistance of solder-leaching due to the Ni-barriered termination, applicable for reflow-soldering, and flow-soldering (GCM18/21/31 type only). 3. The operating temperature range of R7/C7/5C series: -55 to 125 degree C. 4. A wide selection of sizes is available, from miniature LxWxT:0.6x0.3x0.3mm to LxWxT: 3.2x2.5x2.5mm. 5. The GCM series is available in paper or embossed tape and reel packaging for automatic placement. 6. The GCM series is lead free product. n Applications Automotive electronic...

The part numbering code is shown in ( ) and Unit is shown in [ ]. < >: EIA [inch] Code Rated Volt. [Vdc] TC Capacitance Tolerance Part Number 100(2A) GCM32DR72A225KA64L 50(1H) GCM32ER71H105KA37L GCM32ER71H475KA55L 25(1E) GCM32DR71E475KA55L GCM32ER71E106KA57L 16(1C) GCM32DR71C106KA37L GCM32ER71C226ME19L X7R(R7) 1.0ìF(105) 2.2ìF(225) 4.7ìF(475) 10ìF(106) 22ìF(226) ±10%(K) ±10%(K) ±10%(K) ±10%(K) ±20%(M) L x W [mm] Rated Volt. [Vdc] TC Capacitance Tolerance Part Number 10(1A) GCM32ER71A226ME12L 6.3(0J) GCM32ER70J476ME19L X7R(R7) 3.2x2.5(32)<1210> 22ìF(226) 47ìF(476) ±20%(M) ±20%(M)

Step 1 -55+0/-3 15±3 2 Room Temp. 1 3 125+3/-0 (ÆC/R7/C7) 15±3 4 Room Temp. 1 Temp. (°C) Time (min.) Continued on the following page. Apply the rated voltage and 1.3+0.2/-0Vdc (add 6.8k ½ resistor) at 85±3°C and 80 to 85% humidity for 1000±12 hours. Remove and let sit for 24±2 hours at room temperature, then measure. The charge/discharge current is less than 50mA. 6 Biased Humidity The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects Capacitance Change Within ±3.0% or ±0.30pF (Whichever is larger) Within ±12.5%...

Immerse the capacitor in a eutectic solder solution at 260±5° 10±1 seconds. Let sit at room temperature for 24±2 hours, measure. • Initial measurement for high dielectric constant type Perform a heat treatment at 150W0 Y10°C for one hour and then sit for 24±2 hours at room temperature. Perform the initial measurement. 13 Resistance to Soldering Heat The measured and observed characteristics should satisfy the specifications in the following table. Appearance No marking defects Capacitance Change Within the specified tolerance Q/D.F. 30pFmin.: QU1000 30pFmax.: QU400+20C C: Nominal...

Capacitance Frequency 1±0.1MHz 1±0.1kHz Voltage 0.5 to 5Vrms 1±0.2Vrms CV1000pF CG1000pF Capacitance Frequency 1±0.1kHz 120±24Hz Voltage 1±0.2Vrms 0.5±0.1Vrms CV10ìF CG10ìF Visual inspection. 17 Electrical Characterization Appearance No defects or abnormalities Capacitance Change Within the specified tolerance The capacitance/Q/D.F. should be measured at 25°C at the frequency and voltage shown in the table. (1) Temperature Compensating Type (2) High Q/D.F. Dielectric Type 30pF min.: QU1000 30pF max.: QU400+20C C: Nominal Capacitance (pF) *1 W.V.: 25V min.: 0.025 max. W.V.: 16V: 0.035 max...