EDS24 • Fan housing and venturi made of strong galvanised sheet-steel • Each motor is individually tested for 100% quality control • Propeller is statically and dynamically balanced • Special threaded bushes on fan’s side panels permit the fan to be easily hung • Every fan is individually checked for quality Photo shows fully equipped fan EDS24. EDS24 is the ideal air recirculation fan whenever high air movement capacity is required. The unique propeller design is self-cleaning and allows the highest efficiency to be reached. The square fan housing and air conveyor (venturi) are made of a strong galvanised sheet-steel. The 6-blade propeller is statically and dynamic balanced for low noise and low vibration. The propeller is available in stainless steel, galvanised steel and pre-coated and galvanised steel. To improve aerodynamic efficiency, the fan has been developed in Munters euroemme’s R&D lab. The test chamber has been built according to ANSI/AMCA 210-85 Figure 15 specifications. Construction details and airtightness have been verified by personnel of the BESS Lab at the Agricultural Engineering Department, University of Illinois – USA. Propeller and shutter Propeller is directly coupled with motor in order to reduce the number of rotating parts. The principle of the climate controlled environment.

Airflow curve E depth refers to the fan with supplementary CE shutter safety mesh. Motor specifications EDS24 Code Curve refers to EDS24 3Ph 50 Hz motor. Type phases multi* multi* multi* multi* multi* * Multi speed motors must be regulated with auto-transformer which is not supplied. Weight of fully equiped fan1 [kg] Nominal propeller speed 50/60 Hz [rpm] Airflow at 0 Pa1 [m3/h] [cfm] 1 3/Wh] [cfm/w] Specific performance at 0 Pa [m Propeller diameter [mm] [inch] Number of blades IEC protective class of electric motor Electric motor winding insulation grade values refer to 3 phases 50 Hz motor....