1. Catalogs
  2. Munters
  3. Desiccant Dehumidifier

Desiccant Dehumidifier

Desiccant Dehumidifier

Desiccant Dehumidifier

Product catalog summary
Product Overview
The IceDry series is a line of desiccant dehumidifiers specifically designed for cold store environments. By installing an IceDry dehumidifier, frost-free conditions can be achieved without the need for an airlock. The dehumidifier gradually evaporates accumulated ice and frost, ensuring a completely ice-free environment. It features an automatic defrosting function and requires minimal ducting, with reactivation air sourced from an adjacent room. The external electrical cabinet is installed outside the cold store.

Product Variants
The series includes three models: IceDry 800, 1400, and 30. Selection depends on the frost accumulation in the cold store. For installation and unit selection advice, contact a Munters representative.

IceDry30 Specifications
  • Dimensions: Width 1200 mm, Depth 875 mm, Height 1425 mm
  • Weight: 260 kg
  • Process Air: Rated airflow 3000 m³/h, Static pressure 300 Pa
  • Reactivation Air: Rated airflow 630 m³/h, Static pressure 300 Pa
  • Total Power: 22.6 kW
  • Voltage and Current: Various configurations from 200V to 480V
  • Reactivation Air Heater Power: 18 kW
  • Max Noise Level: 75 dBA
  • Air Filter Standard: G3
  • IEC Protective Class: Unit IP33, Electrical Cabinet IP54
  • Permitted Ambient Temperature: Unit -25 to 0°C, Electrical Cabinet -25 to 25°C

Advantages
  • Specially developed for cold store installation
  • Automatic defrosting function
  • Increased efficiency of evaporators
  • Safer cold stores with no slippery floors
  • No need for defrosting the cold store
  • No ice on products, ensuring quality
  • Reduced mechanical failures and maintenance costs

Contact Information
For further assistance, contact Munters representatives in various countries, including Australia, Austria, Belgium, Brazil, Canada, China, Denmark, Finland, France, Germany, India, Italy, Japan, Korea, Mexico, Netherlands, Poland, Singapore, South Africa, Spain, Sweden, Switzerland, Thailand, Turkey, UAE, UK, USA, and Vietnam.
See more

Catalog excerpts

Desiccant Dehumidifier-1

PRODUCT INFORMATION IceDry series By installing an IceDry dehumidifier inside the cold store a frost free cold store can now be a reality. An airlock is no longer needed. When IceDry is installed, accumulated ice and frost will gradually evaporate until the store is completely free from ice and frost. IceDry is the only dehumidifier that has been developed especially for installation inside a cold store. The tough, cold environment demands new and special features created with the sole purpose of ensuring that the unit runs reliably and energy efficient. One example is the automatic defrosting function. IceDry needs only a few metres of ducting around it. Reactivation air is taken from the room next to the cold store. The external electrical cabinet is placed outside the cold store. As soon as the unit is connected to power and switched on it will start to reduce ice and snow. There is also a special reactivation fan in an insulated fan box supplied with a heating cable. There are three sizes, IceDry 800, 1400 and 30. Which unit to choose depends on the amount of frost that builds up in the cold store. The capacity of the units can be used as a guide. For more advice about installation and selection of units do not hesitate to contact your nearest Munters representative. - Specially developed for cold store installation - Automatic defrosting function - Increased efficiency of evaporators. - Safer cold stores - no slippery floors - No need for defrosting of the cold store - No ice on products - secure the quality - Less mechanical failures - reduced maintenance costs W Munters The Humidity Expert

 Open the catalog to page 1
Desiccant Dehumidifier-2

Scaled and dimensioned drawings are available in Munters DryCap program. Measurement of external electrical cabinet Available static pressure (Pa) 300 Available static pressure (Pa) 300 Total power, voltage and current (amps/phase) Reactivation air heater power (kW) 18 Miscellaneous data. Max noise level unducted (dBA) 75 IEC protective class (unit) IP33 IEC protective class (external electrical cabinet) Permitted ambient temp (°C), unit -25-0 Permitted ambient temp, . external electrical cabinet (°C) -25-10 * Permitted ambient temp, . external electrical cabinet (°C) 10-25 * * to be configured...

 Open the catalog to page 2

All Munters catalogs and technical brochures

  1. HC-150

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.