Vertical Chemical Pump Type TNP In PP / PE-UHMW / PVDF Vertical setting depths up to 1600 mm Chemical Pumps

Maximum allowable service pressures and temperatures The above maximum allowable service pressures and temperatures relate to the standard pump design. Higher pressure and temperature applications possible in consultation with MUNSCH GmbH. Applications Type TNP vertical chemical pumps are specifically designed to handle acids, alkalis or chemically contaminated fluids with or without solids. Typical applications include the chemical and metal finishing industries, steel and stainless steel pickling lines, evaporation and regeneration units, wet flue gas scrubbing systems downstream of waste incinerators...

With flange and elbow, wet-end installation With top flange, wet-end installation With flange and elbow, dry-end installation robust / reliable / excellent hydraulics / ease of assembl 1.1 1.2 1.3 11 12 13 14 1 2 3/4 5 15.1 16 17/18/19 6 7 8/9 10 Design features 1 Column pipe with 90° elbow and flange; connection by a suitable pipe union allows the column pipe and/or the discharge flange to be rotated to virtually any position (Fig. 1.1). Option: column pipe with flange or design to customer's specification (Fig. 1.2). 2 Motor shaft directly coupled to pump shaft. 3 Maximum setting depth 1600...

With suction strainer With suction pipe With suction strainer and suction pipe ly and disassembly 11 Standardized motor, frame type V1 with canopy. 12 Low external height above, compact construction below the sole plate; the TNP can still be installed where conventional pump configurations have space problems. 13 Circular sole plate; special sole plate geometries and sole plates with additional supporting flange (tank cover) available on request. 14 Non-contacting Type 10 labyrinth seal integrated into the sole plate prevents product escaping to the atmosphere. It is typically used in service...