E/EH SERIES DUMP PUMPS

E/EH SERIES DUMP PUMPS FOR DECADES, THE MUNCIE E SERIES DUMP PUMP DESIGN HAS BEEN THE STANDARD FOUND AS ORIGINAL EQUIPMENT ON NEARLY ALL DUMP BODIES AND END DUMP TRAILERS. THE DUMP PUMP, OR PUMP AND VALVE COMBINATION, HAS SUCCESSFULLY PROVIDED HYDRAULIC POWER FOR DUMP TRUCKS AND TRAILER DIRECT MOUNT DUMPS IN EVERY CONCEIVABLE APPLICATION. THE EH SERIES PUMP HAS BEEN DESIGNED WITH MANY ENHANCED CAPABILITIES: LARGER INLET TO PROTECT THE PUMP AGAINST CAVITATION, LARGER RETURN PORT AND INTERNAL CORING PASSAGES TO REDUCE BACK PRESSURE IN 3-LINE INSTALLATIONS WHICH PROVIDES BETTER CYCLE TIME AND BETTER...

E/EH SERIES MOUNTING DIMENSIONS IN INCHES (MM) E SERIES PORTS RAISE NEUTRA LOWER .50(12.7) DIA. PINEYE BOTH ENDS .50 (12.7) RAISE NEUTRAL LOWER .50 (12.7) DIA. PINEYE BOTH ENDS DIRECT MOUNT DIMENSIONS SERIES/MODEL GPM (LITERS) REMOTE MOUNT DIMENSIONS SERIES/MODEL GPM (LITERS) Muncie Power Products, Inc.

E/EH SERIES PUMP SPECIFICATIONS PUMP SPECIFICATIONS SERIES/MODEL GPM (LITERS) * Intermittent duty cycles only. Not recommended for ejector, conveyor, or moving floor type equipment. ** Weights listed are for remote mount pumps without brackets. For direct mount pumps add 2 lbs. (0.9 kg). PUMP OPTIONS PUMP SERIES CONVERSION SLEEVE REMOTE MOUNT MOUNTING BRACKET LEVER TO CABLE* HOOK-UP (REMOTE MT) LEVER TO CABLE* HOOK-UP (DIRECT MT) EHK-R EHK-R EHK-DL /EHK-DR** EHK-DL /EHK-DR** * Kit includes attaching bolts. Kit does not include any consoles, cables, or air valves to make kit shift. Contact Muncie...

PUMP FEATURES AND CONSTRUCTION E SERIES SHOWN Hard chrome spool with low leakage fit Highest grade fasteners in the industry with anti-corrosion coating protection and rolled threads Cast Iron 3 Piece FEA Analysis Zinc plating on other exposed hardware components Gears ground for highest efficiency and lowest noise Perforated steel relief valve screen Bronze pressure balanced wear plates with Teflon® coating Premium Heavy Duty Roller Bearings High pressure shaft seals with spiral retainer 23 & 27 GPM SIZES • STANDARD AND HIGH FLOW “H” VERSIONS • PRESSURES TO 2500 PSI • PTO DIRECT MOUNT OR TWIN...

THE MUNCIE CAST IRON/ROLLER BEARING PUMP RED E/EH SERIES IS WARRANTED ONE YEAR PUMP WARRANTY (3 YEAR WARRANTY OPTIONAL) AGAINST ANY DEFECT IN MATERIAL AND WORKMANSHIP WHICH EXISTED AT THE TIME OF SALE BY MUNCIE, ACCORDING TO THE FOLLOWING PROVISIONS, SUBJECT TO THE REQUIREMENTS THAT THE PUMP MUST BE USED ONLY IN ACCORDANCE WITH CATALOGUE AND PACKAGE INSTRUCTIONS, AND THE WARRANTY CARD MUST BE FILLED OUT AND RETURNED TO MUNCIE WITHIN TEN DAYS AFTER THE PUMP IS INSTALLED. THE PUMP IS WARRANTED FOR A PERIOD OF ONE YEAR FROM DATE OF INSTALLATION. IF DURING THE WARRANTY PERIOD THE PUMP FAILS TO OPERATE...