- Catalogs
- multitektechnologies
- MX-SZ3M
MX-SZ3M
MX-SZ3M
- High optical performance achieved through objectives with high magnification and numerical aperture.
- Automatic storage of camera settings for each configuration.
- Manual microscope system usability for metallography and other microscopic applications.
- ISO-conformed detection of particles down to 5 micrometers.
- Height evaluation of particles to assess overall risk potential.
- Differentiation between reflective (metallic) and non-reflective (plastic) particles.
- Sustainable system with high magnification and low calibration values for future requirements.
Catalog excerpts
Measures particle length, breadth, and height where Motorized Microscope functions except for the scanning stage and motorization of the focus drive — are not required. The high resolution optics ensure that particles down to 5 um can be easured. Information about the third dimension is also gained. Multitek Technologies
Open the catalog to page 1
High optical performance by using objectives with high settings for each configuration Manual microscope system can also be used for metallography or other microscopic applications Height evaluation of particles to estimate overall risk potential * Sustainable system with high magnification and low calibration values for future requirements of Differentiation between minimum particle size. reflective (metallic) and nonreflective (plastic) particles MULTITEK TECHNOLOGIES 200-208, Shri Krishna Complex, Vasundhara
Open the catalog to page 2All Multitektechnologies catalogs and technical brochures
MLC-AL1505 Pages
MAZ-S2 Pages
BRINELL Hardness lester4 Pages
MWIT-2003 Pages
MTX-416 Pages
LC1500-1A4 Pages
Roughness Tester2 Pages
Stereo Zoom Microscope3 Pages
MX-532 Pages
Hot Moulding Machine2 Pages
Abrasive Cutting Machine6 Pages
BOND TESTER2 Pages
MX-412 Pages
TOOL MAKER MICROSCOPE2 Pages
MX-SZ2M2 Pages
Vision Inspection System2 Pages
CATALOGUE72 Pages
- Cutting system
- Industrial press
- Metal cut-off machine
- Hydraulic press
- Knife cutting system
- Measuring machine
- Calibration system
- Indentation hardness tester
- Optical microscope
- Table-mounted hardness tester
- Laboratory microscope
- Digital display hardness tester
- Rotary blade cutting center
- Polishing unit
- Benchtop tester
- Automatic measurement system
- Inspection microscope
- Brinell hardness tester
- Inspection machine