video corpo

ML4079ELN

ML4079ELN

ML4079ELN

Product catalog summary
Introduction
The ML4079ELN is an 8-channel, 800G BERT designed for long-reach applications such as PCIe-Gen 3 to 7, automotive, transceiver, and data center interconnect testing. It supports a wide range of line rates and features up to 34dB equalization, built-in ratio level mismatch (RLM), and can test up to 8x66 GBaud.

Key Features
  • Transmit: Supports data rates from 1-66Gbps NRZ and 21.25-66GBaud PAM4. Features include bit rate tuning, DFE and CTLE equalization, independent eye level control, and error injection.
  • Receive: Offers SNR monitoring, PAM histogram monitoring, error detection, and up to 34dB equalization capabilities.
  • General: Includes LabView driver, Python wrapper, shallow loopback testing, and API libraries.

Specifications
  • Bit Rates: NRZ: 1G to 66G; PAM4: 21.25G to 66G.
  • TX Amplitude: 0 – 800 mVpp with 1 mV adjustment steps.
  • Pre-/Post-emphasis: 6 dB with 1000 steps resolution.
  • Random Jitter RMS: < 290 fs.
  • Power: 110 V, 1.4 A or 220 V, 0.9 A – 50/60 Hz.

Target Applications
  • Pluggable and Linear Pluggable Optics Stress Testing.
  • PCIe Gen 3.0 to 7.0 Testing.
  • Copper and Fiber-optic Transmission Lines Testing.
  • Active and Passive Cable Testing.

Additional Features
The ML4079ELN supports real hardware FEC analysis, SER and FEC measurements, and margin analysis on individual channels and blocks of 100G, 400G, and 800G. It also includes a ThunderBERT GUI for monitoring BER, FEC, and SER measurements.

Mechanical Dimensions
The ML4079ELN is a benchtop instrument fitting in a 19-inch 2U rack, with the capability to arrange two units side by side in one 2U slot.

Ordering Information
Includes options for ML4079ELN-Lite, 800X License Package, PCIe6-7 License Package, and various warranty and calibration options.
See more

Catalog excerpts

ML4079ELN-1

Innovation for the next generation 800G BERT | 8 Channel | 66 GBaud PAM4 & 66 Gbit NRZ | SSPRQ, PRBS13Q & PRBS31Q | IEEE802.3ck specs for Long Reach | Real Hardware FEC Analysis | Linear Optics Testing | PCIe Gen 3.0, 5.0 6.0 and 7.0 Applications | Up to 34dB Equalization The ML4079ELN is an 8-channel, 800G BERT purpose built for long reach applications including PCIe-Gen 3, 5, 6 and 7, automotive, transceiver and data center interconnect testing. The ML4079ELN features a wide range of line rate coverage, up to 34dB equalization, built-in ratio level mismatch (RLM), providing a single platform for testing up to 8x66 GBaud. The ML4079ELN includes transmitter equalization (3 or 7 taps FFE), and receiver equalization. The ML4079ELN can provide measurements for Signal-to-Noise Ratio (SNR), histogram measurements, and Real Time BER Measurements and FEC Measurements.

 Open the catalog to page 1
ML4079ELN-2

Introduction The ML4079ELN is a fully featured 800G BERT that can be configured for eight channels of 1-1.5Gbps; 2.55-5.9Gbps; 7.3-11Gbps; 24-32Gbps and 4166Gbps NRZ and 21.25-21.75GBaud; 26.562536GBaud and 44-66GBaud PAM4. The transmitters support all standard test patterns mandated by IEEE802.3ck stress testing and OIF such as PRBS13Q, PRBS31Q, etc. Tx can also be programed to output a user-defined pattern. The ML4079ELN supports transmitter and receiver equalization up to 34dB to overcome signal integrity impairments due to channel losses or reflections. Additionally, users can opt to programmatically...

 Open the catalog to page 2
ML4079ELN-3

Using ThunderBERT GUI, both instant and accumulated BER, FEC, and SER measurements can be displayed and monitored: Figure 3: ThunderBERT GUI Screenshots Showing BER Measurements Figure 4: ThunderBERT GUI Screenshots Showing SER Measurements RLM Stress Test: Inner/Outer Eye Control on PAM4 Mode: ML4079ELN supports a full Inner and Outer Eye Control Range using the ThunderBERT GUI. This feature enables the robustness testing of the transmitted signal by changing the Inner/Outer Eye settings and measuring the Level Separation Mismatch Ratio (RLM). The obtained value is compared to the IEEE 802.3...

 Open the catalog to page 3
ML4079ELN-4

Specifications Parameter

 Open the catalog to page 4
ML4079ELN-5

Mechanical Dimensions The ML4079ELN is a benchtop instrument that fits in a 19-inch 2U rack. Two ML4079ELNs arranged side by side take up one 2U slot in a rack. MultiLane also supplies the needed brackets. Note: The ML4079ELN-Lite combined with the 800X and PCIe6-7 configurations provides the full functionality and specifications of the ML4079ELN as listed in the datasheet.

 Open the catalog to page 5
ML4079ELN-6

Recommended Accessories Part number Please contact us at [email protected]

 Open the catalog to page 6

All MultiLane catalogs and technical brochures

  1. ML1016E-CR

    5  Pages

  2. ML7064E-L-UMT

    6  Pages

  3. ML4039EN

    6  Pages

  4. ML4039E

    5  Pages

  5. ML4039D

    5  Pages

  6. ML4039B

    6  Pages

  7. ML4039-BTP

    5  Pages

  8. ML4039E-ATE

    5  Pages

  9. ML9004E

    8  Pages

  10. ML4035

    7  Pages

  11. ML4015E

    9  Pages

  12. ML4025E-PLS

    5  Pages

  13. ML4025F-PLS

    5  Pages

  14. ML4079EN

    10  Pages

  15. ML4079E

    5  Pages

  16. ML4079D

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.