ML4039-BTP 4 Lane 8.5-15 & 21-30 Gbps 100G Bit Error Rate Tester Vertical & Horizontal Eye Closure | Bathtub Curve Measurement | Eye Contour Measurement | Receiver Sensitivity | Jitter Tolerance | With the accelerated growth of hyperscale datacenters, the performance demands on Ethernet network infrastructure is increasing exponentially, and customer expectations for high-speed data throughput is at an all-time high. As a result, Bit Error Rate Testers (BERT) have become a cornerstone for physical layer testing, from qualifying bit transmission for fiber optic and copper-wire digital data transmission lines to testing signal integrity. A BERT generates a sequence of bits through a communication channel and the received bits are then compared against the transmitted bits. A Bit Error Ratio (BER) evaluates the full end-to-end performance of a connectivity system and assures communication reliability. The ML4039-BTP is a 4x30 Gbps BERT that supports NRZ signal generation required for 100G measurements. It is ideally suited for the production testing of systems, components, and Electro-Optical Modules. It supports the required test patterns defined by IEEE and OIF. Other features include signal-tonoise ratio (SNR) and histogram measurements, as well as transmitter and receiver equalizers.

multi Lane^ The ML4039 series is a state-of-the-art 4 Lane Pulse Pattern Generator and Error Detector with Jitter Generator as well as Equalizer up to 30 Gbps. It is fully equipped for lab and production testing of systems, components, and Electro-Optical Modules and O-optical modules. • Data Rates: 8.5-15 & 21-30 Gbps • Ability to tune the bit rate in steps of 100 kbps and find the RX PLL locking margin • Independent control of inner eye levels • Up to 0.8 Vppd output swing • PRBS 7/8/15/23/31 and their inverses • Error injection • Programmable front-end attenuator • Error-detection on following...

Electrical Specifications Parameter

Figure 4: Multiple layouts of bathtub for four channels Figure 5: Multiple layouts of eye contour for four channels Figure 6: Single layout of Contour for one channel

multi Lane^Mechanical Dimensions The ML4039 is a benchtop instrument that fits in a 19-inch 2U rack. Two ML4039s arranged side by side take up one 2U slot in your rack. MultiLane also supplies the needed brackets. Please contact us at [email protected].