video corpo

ML1016E-CR

ML1016E-CR

ML1016E-CR

Product catalog summary
Introduction
The ML1016E-CR is a cost-effective optical Clock Data Recovery (CDR) solution designed for 53.125 GBd PAM4 optical measurements, particularly suitable for 100G Lambda MSA transceivers. It supports a wavelength range of 1260 to 1650 nm Single-Mode and is compatible with standards such as 400GBASE-DR4/FR4/LR4 and 100GBASE-DR/FR/LR.
Key Features
  • Triggers any reference scope for perfect CLK to data synchronization.
  • Correlates well with Tier one CDR solutions.
  • Supports only 53.125Gbaud with a fixed loop bandwidth of 4MHz.
  • Rate/16 and Rate/32 support.
Technical Specifications
  • Input Connector: FC PC
  • Power Input Range: 5dBm to -2dBm
  • Jitter: 300fs
  • Loop Bandwidth: 4MHz
  • Data Rate Support: 53.125Gbaud
  • Modulation: PAM4
Applications
  • Production testing of 400G transceivers
  • Optical transceiver test and evaluation
  • Transceiver manufacturing and validation
  • Incoming inspection of transceivers
Mechanical Dimensions
The ML1016E-CR is a benchtop instrument that fits in a 19-inch 2U rack, with brackets supplied by MultiLane.
Ordering Information
  • ML1016E-CR- Standalone CR
  • OPT-53: Optical Only 53Gbaud/28Gbaud
  • E-53: Electrical Only 53Gbaud/28Gbaud
  • OPT-E-53: Fully Loaded Optical + Electrical 53Gbaud
  • 3YW: 3 Years Warranty
  • 5YW: 5 Years Warranty
  • EXP1: Extended Warranty Plan – 1 Year
Annex A: Test Results
Performance of the O-CR is almost identical to direct clocking from the BERT, indicating high reliability and accuracy.
Annex B: Correlation
Data shows minimal offset in TDECQ measurements when using ML1016E-CR compared to Keysight CDR, demonstrating its precision.
See more

Catalog excerpts

ML1016E-CR-1

ML1016E-CR 53.1 GBd PAM4 Optical and Electrical Clock Recovery Module 53.125 GBd PAM4 400GBASE-DR4/FR4/LR4 & 100GBASE-DR1/FR1 transceiver testing | Ideal for 100G Lambda MSA transceivers | Triggers ML4015E Optical Scope for Optical Transmitter TDECQ measurement as well as any other reference scope. The ML1016E-CR is a 53.125 GBd PAM4 Optical Clock Recovery solution ideally suited for 100G Lambda MSA optical measurements. The recovered clock can trigger the ML4015E Optical Scope and other reference scopes to perform 53.125 GBd PAM4 optical measurements such as TDECQ, OMA, and others. ML1016E-CR supports a variety of standards such as 400GBASE-DR4/FR4/LR4, and 100GBASE-DR/FR/LR. The optical power range for the ML1016E-CR is from 5dBm down to -2 dBm (spec at the input of the ML1016E-CR). Considering the 50% splitter ratio, the CDR alone receive half of this power and the lowest is around -5.5 dBm.

 Open the catalog to page 1
ML1016E-CR-2

multi Lane^ The ML1016E-CR is a fully featured, cost effective optical CDR solution. The supported wavelength is 1260 to 1650 nm Single-Mode. The ML1016E-CR is a unique solution for triggering from the same optical channel to have the perfect CLK to data synchronization and to match with the required specs for TP3 testing. Full set of features below: • Ability to trigger any reference scope • Correlates well with Tier one CDR solutions, (Correlation data available upon request). • Fixed loop bandwidth of 4Mhz A complete set of APIs and a dozen of example code to speed up integration under Linux...

 Open the catalog to page 2
ML1016E-CR-3

multi Lane^Mechanical Dimensions The ML1016E-CR is a benchtop instrument that also fits in a 19-inch 2U rack. MultiLane also supplies the needed brackets. Ordering Information Option

 Open the catalog to page 3
ML1016E-CR-4

Annex A: Test Results at 53.125 GBd PAM4 Data captured with direct clock from BERT Data captured with O-CR As can be seen from the data above, the performance of the O-CR is almost identical to the performance with direct clocking from the BERT (Line Side synchronous Trigger).

 Open the catalog to page 4
ML1016E-CR-5

High TDECQ Transceiver Using Keysight CDR Amplitude Time Outer OMA(ilBm) Outer FxR Power Excursion!!,UU-») Auto Scale Calculate • Satnpllllfl Quick Menu

 Open the catalog to page 5

All MultiLane catalogs and technical brochures

  1. ML7064E-L-UMT

    6  Pages

  2. ML4039EN

    6  Pages

  3. ML4039E

    5  Pages

  4. ML4039D

    5  Pages

  5. ML4039B

    6  Pages

  6. ML4039-BTP

    5  Pages

  7. ML4039E-ATE

    5  Pages

  8. ML9004E

    8  Pages

  9. ML4035

    7  Pages

  10. ML4015E

    9  Pages

  11. ML4025E-PLS

    5  Pages

  12. ML4025F-PLS

    5  Pages

  13. ML4079ELN

    6  Pages

  14. ML4079EN

    10  Pages

  15. ML4079E

    5  Pages

  16. ML4079D

    6  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.