Hyper-Scale Testing for the Terabit Era
1 / 32Pages

Hyper-Scale Testing for the Terabit Era

This brochure reflects the full diversity of MultiLane solutions, from Loopbacks and CMIS management, testing instruments, personalized engineering services, to creating the building blocks for our products with our new interconnects, we have cast a wide net while maintaining our exceptional quality to ensure we can continue to meet and exceed market expectations. Happy browsing! Our journey of growth over the past ten years to meet the rising demands of high speed networks. First Interconnects & 10G BERT Hyperscaler Compliance Services 112G spurs Loopback Evolution 4,000+ Loopbacks Weekly...

ACCELERATING HIGH-SPEED ADOPTION ACROSS THE INDUSTRY MultiLane Data Center Test Solutions offer an extensive selection of testing capabilities to enable the modern day data center. We have ready solutions for the most dominant form factors across many generations. Our focus is on the specialized tools that allow for the development of 1.6T hosts ports and next-gen pluggables; accelerating both the current and next generation of Giga/Terabit ethernet.

As the race to 224Gbps/lane heats up, MultiLane stands ready to accelerate the development and adoption of this latest technology with three new products in 224Gbps Signal Integrity characterization. Taken together, these products offer a compliance and development suite to accelerate vital R&D for next-gen networks. The latest MultiLane Channel Emulation Board, the ML4067-224 provides a comprehensive set of trace paths for 224Gbps signals to test and validate responses to lossy channels. With 11 traces at 92 and another 11 traces at 100 Ohms the ML4067-224 can emulate losses which range...

Data Center Test Solutions MultiLane’s line of OSFP-XD Host and Module Compliance Boards (HCBs and MCBs) are ready to accelerate the industry into the Terabit generation. The ready-to-ship ML4064-XD-MCB-112-MXPM70 provides a means of testing very early OSFP-XD pluggables, while the ML4064-XD-HCB1/2-112 and its series of high-performance SI traces allow for early port characterization/testing. Both test fixtures are compliant with the CEI-56G-VSR-NRZ and IEEE 802.3ck specs. ML4064-XD-MCB-112-MXPM70 Key Features • MCB loss including the 3” MXPM70 cable is compliant with CEI-56G-VSR-NRZ and...

Data Center Test Solutions Nexus Analyzer As new CMIS standards are developed and adopted, with a wide variety of SFF and CMIS specs available, CMIS testing becomes increasingly complex and time consuming. The MultiLane Nexus Analyzer is a direct response to this complexity, designed with speed and simplicity at its core. A CMIS/SFF debug tool for interoperability testing and CMIS/SFF failures, the Nexus Analyzer is equipped with a full feature sweep implemented in its GUI. The Nexus Analyzer is used as a verification tool to validate the CMIS/SFF implementation, with a CMIS/SFF register...

Data Center Test Solutions Nexus Analyzer Adapter Analyzer • SI traces and connector support 112G rates • Current and temperature sensor • Module power ripples and inrush current measurement • Detection of power spikes during module state transitions • Probing interface for Vcc and GND pins • Dip switch to choose low-speed signal source: internal/external • Available in all SFF/CMIS form factors • Voltage sensor • ePPS signal validation • Probing interface for low-speed signals • External control for any low-speed signal: • LEDs for control/alarm signal status • USB port for PC connection...

Data Center Test Solutions The move to 800G brings with it a paradigm shift in loopback design. The complex characterization techniques required for host ports at 8x112Gbps necessitate the advent of a new generation of loopbacks to address these challenges. MultiLane’s Active Loopbacks are DSP-based modules designed specifically to account for these complex characterization techniques, while also covering the established requirements - thermal management and CMIS interoperability - for host port testing. • Thermal Emulation • PRBS Generator • BER/SNR Diagnostics • Gray Mapping supported •...

Data Center Test Solutions MultiLane’s Data Center DevKits provide an all-in-one solution for network testing and design. Each kit contains the appropriate module/host compliance board, loopbacks, and CMIS analyzers for Module, Host, or Compliance testing across 6 form factors supporting speeds from 50 to 800G. QSFP-DD | OSFP | QSFP | DSFP | SFP-DD | SFP ML4062-MCB-112: Module Compliance Boards test any pluggables in their respective form factor. They validate the compliance, signal transmission, and any other feature the pluggable has. They also test the thermal capability of modules and...

LEADING INSTRUMENTS FOR A MULTITUDE OF USECASES A core competency at MultiLane, our Measurement Solutions offer a diversity of instruments for equally diverse applications, from 224Gbps/lane BERT testing, to ultra-high-density interconnect validation, to enhanced signal capture with MultiLane DSOs, to our PAM8-capable AWG. Many MultiLane solutions can be fitted to the MultiWave Test Platform offering customers a completely tailored solution to cover almost any testing requirement. multi Lane.

The MultiWave Test Platform (MWTP) is the latest measurement solution from MultiLane, with top-tier performance and flexibility across a wide variety of testing applications. Using the latest MultiLane Mirage Enclosure, the MWTP can house up to 6 different instruments in a single rack unit - for both data center and benchtop environments -offering a range of solutions suited to any testing need. The MWTP provides the perfect balance of flexibility and ease of use. The expanded enclosure allows any combination of MultiLane instruments to be placed into a custom-built MultiWave Test Platform...

Measurement Solutions Next-Gen Measurement Solutions Ultra-High-Throughput Copper Validation Copper remains a vital component of current and next-gen networks, with high-density copper interconnects key components in AI clusters. With thousands of differential pairs and even a single point of failure capable of bringing down an entire system, rapid, comprehensive testing is essential. Given the critical issues of reliability, cost, and scale that have come to define this generation of network technology, MultiLane has found that Bit Error Rate Testers (BERTs) serve as more effective solutions...