DATA CENTER TEST SOLUTIONS Development Kits
1 / 38Pages

Module Compliance Boards | Adapters & Analyzers | Loopbacks Host Compliance Boards | Adapters & Analyzers | Loopbacks | Active Loopbacks Module Compliance Boards | Host Compliance Boards | Adapters & Analyzers | Loopbacks

MultiLane Module Testing Kits enable module vendors to validate their transceivers and passive/active cables, within a certain set of standards, with supporting speeds up to 400G and even 800G. Each module testing kit contains a Module Compliance Board, Analyzer, and loopbacks. These boards are used with any form of pluggable in their respective form factor. They serve to validate the compliance, signal transmission, and any other feature the pluggable has. They are also used to test the thermal capability of modules, as well as stress testing them to evaluate their output. The Module...

MultiLane Port Testing Kits enable system and host vendors to validate signal integrity and performance margin across all ports of their platforms, supporting speeds up to 400G and even 800G. Port Testing Kits contain the following items: Host Compliance Boards, Adapters and Analyzers, and loopbacks. Host Compliance Boards or Breakout Boards, test the electrical paths of devices like switches, routers, or transponders. They ensure that the output signal of the host is clean enough. Adapters and Analyzers: (ML4066 & ML4066-ANA) Once the electrical paths of the system host ports are...

112G/ lane Compliance testing made easier with our ML Compliance testing Kits. • Module Compliance Boards • Host Compliance Boards These boards are used with any form of pluggable in their respective form factor. They validate the compliance, signal transmission, and any other feature the pluggable has. They also test the thermal capability of modules and can stress test them to evaluate their output. In compliance testing, MCBs are used to test transceivers against certain standards. MCBs can be connected to any instruments used in full compliance tests, like Bit Error Rate Testers...

MODULE TESTINGMLDCTS-QDD-KIT1: 400GML4062-MCB: Supports 8x28G NRZ and 8x56G PAM4 All 8 channels come with matching trace length High performance signal integrity traces from 2.4-mm or 2.92-mm K connectors to QSFP-DD host connector On-board LEDs display MSA output alarm states On-board pin headers for MSA I/O control User friendly GUI, USB interface • Loops back TX & RX with good performance signal integrity traces • MSA Compliant shell and latching mechanism • Ten power spots, dissipating up to 23.4W • Four temperature sensors slave compliant with MSA • Implements MSA memory maps with...

MODULE TESTINGMLDCTS-QDD-KIT2: 800GML4062-MCB-112: - Supports 8x56G NRZ and 8x112G PAM4 All 8 channels come with matching trace length High performance signal integrity traces from 2.4-mm or 1.85-mm connectors to QSFP-DD 112 host connector. On-board LEDs display MSA output alarm states On-board pin headers for MSA I/O control User friendly GUI, USB interface • Loops back TX & RX with good performance signal integrity traces • MSA Compliant shell and latching mechanism • Four power spots, dissipating up to 16W • Four temperature sensors • I2C terminated by microcontroller, I2C slave...

Low insertion loss PCB traces Power pins and low speed signals are Ability to drive I2C from external pin headers, or connect I2C packet analyzer Ability to drive 3.3 V from external source for power supply margining Ability to break 3.3 V power from Host to module allowing voltage and current Windows based GUI and API Library Detection and measurement of host pull-up + pull-down resistors on low-speed signals VCC spectral noise analysis Functional tests CMIS state machine test Supports 4x28G NRZ and 4x56G PAM4 High Performance signal integrity traces All channels come with matching trace...

• Low insertion loss PCB traces • Power pins and low speed signals are accessible via pin headers • Ability to drive I2C from external pin headers, or connect I2C packet analyzer • Ability to drive 3.3 V from external source for power supply margining • Ability to break 3.3 V power from Host to module allowing voltage and current measurement • Windows based GUI and API Library • Detection and measurement of host pull-up + pull-down resistors on low-speed signals • VCC spectral noise analysis • Functional tests • CMIS state machine test • High Performance signal integrity traces • All...

COMPLIANCE TESTING QSFP-DD MLDCTS-QDD-KIT5: 800G ML4062-MCB-112: Supports 8x56G NRZ and 8x112G PAM4 All 8 channels come with matching trace length High performance signal integrity traces from 2.4-mm or 1.85-mm connectors to QSFP-DD112 host connector On-board LEDs display MSA output alarm states On-board buttons/jumpers for MSA I/O control signals and I2C interface User friendly GUI, USB interface ML4062-LB-112: Loops back TX & RX with good performance signal integrity traces MSA Compliant shell and latching mechanism Four thermal spots, dissipating up to 16W Four temperature sensors I2C...

• Loops back TX & RX with good performance signal integrity traces • MSA Compliant shell with latching mechanism • Nine thermal spots, dissipating up to 16W slave compliant with MSA • Implements MSA Memory Map with programmable new pages • CMIS compliant state machine • All 8 channels come with matching trace length • High performance signal integrity traces from 2.92-mm or 2.4-mm K connectors to OSFP host connector • On board LEDs display MSA output alarm states • On board pin headers for MSA I/O control signals and I2C interface • User friendly GUI, USB interface • Low insertion loss PCB...

• Loops back TX & RX with good performance SI Traces • MSA Compliant Shell with latching mechanism • Four thermal spots, dissipating up to 17.5W • I2C Terminated by microcontroller, I2C slave compliant with MSA • Implements MSA Memory Map with programmable new pages • CMIS compliant state machine • All 8 channels come with matching trace length • High performance signal integrity traces from 2.4-mm or 1.85-mm connectors to OSFP112 host connector • On board LEDs display MSA output alarm states • On board pin headers for MSA I/O control signals and I2C interface • User friendly GUI, USB...