Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Multichem Sp. z o.o.
  3. SilverLine

SilverLine

SilverLine
1 / 1 PageView full catalog

SilverLine

Product catalog summary
Product Overview: The document outlines the specifications and usage guidelines for SilverLine, a special 1K coat designed for the renovation and repair of automotive rims and hubcaps made of steel and light alloys. It offers excellent coverage and fast drying time, and can be covered with various clear coats for different finishes.
Specifications: The product is packaged in 3.5 L units, with a recommended mixing ratio of 100 parts SilverLine to 100 parts thinner CP 048. It requires two full layers or until full coverage is achieved, followed by an additional mist coat. The recommended spray gun settings include a gravity nozzle of 1.2-1.4 mm or a suction nozzle of 1.4-1.6 mm, with operating pressures of 4 bar for high pressure and 2 bar for HVLP.
Surface Preparation: Surfaces should be cleansed with a silicone remover and prepared with aged and roughened coatings, using 2K acrylic and epoxy primers based on PROFIX technology. The recommended paint strainer sizes are 125-190 µm, and the thickness of the dry coating should be approximately 15-30 µm.
Performance and Durability: The product has an output of approximately 7-8 m² per liter, with a spray viscosity of 17-19 seconds in a DIN Cup 4 mm at 20°C. It complies with VOC guidelines and has a minimum durability of 36 months in its original unopened package.
Application and Drying: The drying time at 20°C and 65% humidity is 15 minutes to be dust-free, with a 10-15 minute wait before applying a clear coat. If not covered with a clear coat within 8 hours, the surface should be reapplied with matt prior to painting. Evaporation time before applying consecutive layers is 5 minutes until a matt effect is achieved.
Additional Recommendations: PROFIX clear coats are recommended as a protective layer. After adding B 004 binder and H 004 hardener, no further protective coating is required. The document also provides recommendations for clear coats, including MS, HS, UHS, and VHS types.
Performance Ratings: The product is rated highly for paint fluidity, gloss, resistance to scratches, plastic adhesion, and adhesion to ferrous metals.
See more

Catalog excerpts

SilverLine-1

For renovation and repair of automotive rims Special coat 1K for renovation and repair of automotive rims and hubcaps made of steel and light alloys. Exceptionally good coverage, with a very fast drying time. Can be covered with various clear coats including LS, MS and HS – with both highgloss and matt finishes. PROFIX clear coats are recommended as a protective layer. After adding B 004 binder and H 004 hardener, the product requires no further protective coating. Packaging Paint fluidity: Gloss: Resistance to scratches: Plastic adhesion: Adhesion to ferrous metals: Surface preparation: Cleansing with silicone remover; Aged and roughened coating; 2K acrylic and epoxy primers based on PROFIX technology. Lacquering plastics. Base Coat 1K. Recommended thinner Two full layers or until full coverage is achieved and an additional mist coat. Spray gun*: Gravity nozzle: 1.2‑1.4 mm. Suction nozzle: 1.4‑1.6 mm.* Operating pressure - high pressure: 4 bar*; HVLP: 2 bar*. * Use high pressure equipment and HVLP. Pressure as recommended by the gun manufacturer. Recommended sizes of paint strainers: Evaporation before applying consecutive layers: 5 min (until matt effect is achieved). Drying time 20°C, 65% H.R: Dust free: 10-15 min prior to applying clear coat*. * after approx. 8 hours the surface painted with the SilverLine coat but not covered with clear coat shall be reapplied with matt prior to painting. 2004/42/WE/IIB(e)(840) 634,5 Date of minimum durability: 36 months (in the original unopened package) Clear coat. The recipe of the product complies with the VOC guidelines. The products supplied by our company are subject to a number of factory tests, so they can meet the highest demands. However, be aware of the individual conditions of storage, preparation and applications that can influence on the effect of varnishing. The guarantee to keep the highest quality of the coating is to use the product only with the products of the Manufacturer and in accordance with the recommendations of the Manufacturer. The Manufacturer does not guarantee performance and compatibility of the Products with products other than those of the Manufacturer. In order to recognize the guarantee and all claims, the user shall use the technologies and techniques for given Products - according to the technical data sheet and execute

 Open the catalog to page 1

All Multichem Sp. z o.o. catalogs and technical brochures

  1. CP 582 Bumper
    CP 582 Bumper

    1  Page

  2. Black Plus
    Black Plus

    1  Page

  3. Kar-Bon
    Kar-Bon

    2  Pages

  4. LV Cryl
    LV Cryl

    2  Pages

  5. Products Catalog
    Products Catalog

    32  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.