Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Multichem Sp. z o.o.
  3. CP 582 Bumper

CP 582 Bumper

CP 582 Bumper
1 / 1 PageView full catalog

CP 582 Bumper

Product catalog summary
Product Overview: The document details the specifications and usage guidelines for CP 582 Bumper, an acrylic lacquer designed for the recovery and renovation of polymer elements such as bumpers, wing mirror bodies, and rubbing strips. It is a one-component structural coat that generally does not require additional additives for adhesion or elasticity.
Specifications: The product is packaged in 1L units, with three units per box. The recommended mixing ratio is 100 parts of CP 582 to 10-20 parts of thinner CP 040. The spray gun nozzle opening should be 1.6-1.8 mm, with operating pressures of 4 bar for high-pressure and 2 bar for HVLP methods.
Surface Preparation: Surfaces should be cleansed with remover CP 012 or CP 015. An adhesion test is recommended, and CP 390 Plastic Primer may be used if necessary. The recommended paint strainer size is 190 µm.
Coating and Application: The thickness of the dry coating should be approximately 70-80 µm, with an output of 8-9 m²/l at 50 µm. Spray viscosity at 20°C is approximately 48-50 seconds using a DIN Cup 4 mm. The product complies with VOC guidelines (2004/42/WE/IIB(e)(840) 640).
Durability and Drying Times: The product has a minimum durability of 24 months in its original unopened package. Drying times at 20°C and 65% humidity are 10 minutes dust-free, 30 minutes air dry, 5 hours prior to assembly, and 12 hours through dry. At 60°C, drying time prior to assembly is 20 minutes, and IR drying takes approximately 15 minutes.
Performance Characteristics: The product can be covered with any Profix coating. It has high ratings for paint fluidity, gloss, resistance to scratches, and plastic adhesion, but lower adhesion to ferrous metals. Evaporation time before applying consecutive layers is 5 minutes.
Recommendations: It is crucial to use the product in accordance with the manufacturer's recommendations and only with compatible products to ensure quality and performance. A sample spray should be executed prior to target painting to verify compatibility and performance.
See more

Catalog excerpts

CP 582 Bumper-1

CP 582 Bumper Acrylic lacquer 1K Bumper is a one-component structural coat for recovery and renovation. Works on polymer elements such as bumpers, wing mirror bodies and rubbing strips. For most polymers the coat needs no extra additives to enhance adhesion nor elisticizers. It is recommended to perform test spraying to verify the need of using CP 390 Plastic Primer enhancing adhesion. Available colors 1 L Paint fluidity: Gloss: Resistance to scratches: Plastic adhesion: Adhesion to ferrous metals: 10-20 parts of thinner CP 040. Spray gun*. Nozzle opening with the pneumatic method: 1.6‑1.8 mm. Operating pressure – High-pressure: 4 bar*; HVLP: 2 bar*. * Use high pressure equipment and HVLP. Pressure as recommended by the gun manufacturer. Surface preparation: Cleansing with remover CP 012 or CP 015. In the plastics repair technology, it is recommended to perform an adhesion test and possibly use CP 390. Recommended sizes of paint strainers: Evaporation before applying consecutive layers: 5 min Drying time 20°C, 65% H.R: Dust free: Air dry: Prior to assembly: Through dry: Drying time 60°C, 65% H.R: Prior to assembly: Can be covered with any Profix coating. Date of minimum durability: 24 months (in the original unopened package) The recipe of the product complies with the VOC guidelines. The products supplied by our company are subject to a number of factory tests, so they can meet the highest demands. However, be aware of the individual conditions of storage, preparation and applications that can influence on the effect of varnishing. The guarantee to keep the highest quality of the coating is to use the product only with the products of the Manufacturer and in accordance with the recommendations of the Manufacturer. The Manufacturer does not guarantee performance and compatibility of the Products with products other than those of the Manufacturer. In order to recognize the guarantee and all claims, the user shall use the technologies and techniques for given Products - according to the technical data sheet and execute the

 Open the catalog to page 1

All Multichem Sp. z o.o. catalogs and technical brochures

  1. Black Plus
    Black Plus

    1  Page

  2. SilverLine
    SilverLine

    1  Page

  3. Kar-Bon
    Kar-Bon

    2  Pages

  4. LV Cryl
    LV Cryl

    2  Pages

  5. Products Catalog
    Products Catalog

    32  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.