Speed (m/min) • fabricated metal grid • phenolic (with/without vacuum, flat or machined) • aluminum (with/without vacuum, flat or machined) • T-slots • hybrid (vacuum + mechanical clamping) • single area on models X mm. 1800, 2600 • two independent areas with removable central partition to separate the working area from the open area, on model X mm. 3100 • rotary or twin shuttle stables, for loading/unloading outside the enclosure Electro spindles The machine is predisposed for: • bellow covers for guide protection • tool setter • auto calibration of the head geometry • Minimal Quantity Lubrication for tool cooling Automatic Tool Changer The machine is predisposed for: • 8/16/24 pressurized tool posts • specific magazines (for ultrasonic knives, discs, tools, etc.) • special magazine posts for oversized tools/units Dust extraction and scrap conveyors The machine is predisposed for: • full enclosure with roof + interior lighting • dust extraction with controlled-length hood • scrap conveyors • manual drawers under working areas • deionizer MULTIAX INTERNATIONAL CNC S.R.L. Viale Europa, 11 - 33070 Brugnera (PN) - Italy Ph: +39 0434 598151 Fax: 39 0434 598175 [email protected] MULTIAX AMERICA Inc. 3000 Remico St. SW Grandville, MI 49418 - USA Ph: +1 616.534.4530 Fax: +1 616.534.4570 [email protected]

The smartest closed cell CNC 5 axis machining center for composites is compact, enclosed, with a moving bridge design, engineered to perform highly accurate 3D operations. The bridge is moved with a twin master/slave drive configuration and there are many options available to make possible a wide range of configurations to meet very specific requirements. P SERIES: MOVING BRIDGE > TRASVERSAL GANTRIES