HUMY 3000
4Pages

HUMY 3000 Continuous inline moisture measurement of bulk materials The moisture in solids is an important parameter which strongly influences the quality of the product and the efficiency of the production. However, the common measurement method is still the examination of samples in the laboratory, which is time-consuming and the results of which are only available with a delay. Animal food Building materials Chemical industry Coal processing Fertilizer industry Food industry Metal processing Pharmaceuticals Plastics Power plants Pulp and Paper Recycling Steel industry Tobacco Wood etc. Our inline moisture measurement system HUMY 3000 is the better alternative. It allows immediate reaction to moisture changes, e.g. by regulating a dryer, an automatic humidification system or other process parameters. It is equipped with a local control unit, and can be operated with or without connection to a PLC. HUMY 300/3000 Continuous inline moisture measurement MF 3000 Microwave mass flow measurement FS 510 Microwave material flow monitoring FS 600 Electrostatic material flow monitoring FS 700/710/750 Triboelectric dust monitoring LC 510 Microwave barrier and limit level monitoring

Main Benefits - Continuous and exact real-time recording of moisture - No waiting time for time-consuming lab sampling - Ensures the product contains not more or less than the maximum permissible water content, therefore improves product quality and reduces production costs - Saves energy during drying - Most accurate device of its class, accuracy up to 0,1 % (depending on the product) - Measures total water content, not only the water on the surface - Very robust, suitable for a harsh environment - Encapsulated sensor with vibration-proof design, can even be used in vibration channels -...

Features The sensor of the HUMY 3000 is very robust and flexible. A sensor surface out of POM, Teflon or ceramic is available to handle abrasive or aggressive materials. A high temperature and an ATEX option for zone 20 or zone 0 are available. The device is equipped with two analog outputs for moisture and temperature, a relay for alarm signals and a RS485 Modbus interface. Calibration can be done at the device, up to 24 data sets can be stored. A Datalogger for up 2 years of data is integrated and the stored data can be downloaded to a Windows software. temperatures. A self-monitoring...

Technical Data Sensor Technical Data HUMY 3000 Housing material Measured moisture Stainless steel (1.4301 or 1.4307 as option) Sensor surface K = POM C = Ceramic (optional) T = Teflon (optional) S = Ceramic+Teflon (optional) Ambient temperature 0°C to +70°C (K/C vers.) 0°C to +80°C (T/S vers.) Process temperature 0°C to +90°C (Non ATEX) 0°C to +120°C (Non-ATEX with high temperature option) 0°C to +70°C (ATEX with K/C) 0°C to +90°C (ATEX with T/S) Process pressure 6 bar (10 bar temporarily) Protection class IP67 Output RS485 to connect with HUMY/ SCS 3000 control unit Cable length Shielded...