Specifications:
The document provides detailed specifications for connecting threads and slide clamps used in mounting plastic pipes. It includes part numbers, sales units, pack units, and dimensions for various sizes ranging from M8 to M8/M10. The dimensions are specified in millimeters for different parameters such as B, b1, H1, H, and V.

Vibration Control:
The document outlines the maximum recommended load for different sizes of clamps, ranging from 800 N for sizes 16-40 mm to 2,320 N for sizes 75-160 mm. These clamps are designed for plastic pipes and are galvanized.

Field of Application:
The slide clamps are primarily used for mounting plastic pipes and facilitating gliding. They are equipped with a special lining for smooth and noiseless sliding, and a DÄMMGULAST® compound for vibration control to optimize noise damping.

Advantages:
- The lining is designed to prevent slipping out due to its positive-fit joining with the clamp.
- Can be used as an anchor point by removing spacers.
- Features a quick mounting mechanism with a self-securing latch that prevents inadvertent opening.
- Includes a tightening screw with a combination, captive cross-head for convenient use with a power driver.

Installation Recommendations:
To prevent tilting of the slide clamp, the document advises not to exceed specific threaded rod lengths: 80 mm for sizes 16 mm‒50 mm and 60 mm for sizes 56 mm‒160 mm. It also emphasizes adhering to the support distances recommended by plastic pipe manufacturers.