Heavy-Duty Pipe Supports © ƒ½„¯ƒÀƒÂƒ¿ – A Concept for Progress and Quality 5/1 08/07 The MÜPRO Pipe Slides, Pipe Clamps and Accessories can be supplied in various designs. Part numbers for the desired design are given on the data sheets that list the different combinations of material and surface treatment as well as the MÜPRO screws to be used. Identification system for MÜPRO Pipe Slides Selecting heavy-duty pipe supports Example of identifier: T-Section Slide Guide made from S235JR (St37) with 2 MÜPRO Pipe Clamps, MÜPRO Pipe Slide hot-dip galvanised, with galvanised MÜPRO screws and nuts, Property Class 8.8, for pipe outside diameter of 60.3 mm. Part No. 10600 Type: TP80-2-W37-OF-SF-60.3 The type name and identifier are according to the following code: Pipe Slide type: Identifier Pipe Slide material W37 Steel S235JR (RSt 37) WA2 V2A stainless steel WA4 V4A stainless steel Pipe Slide surface finish OR untreated /black OF hot-dip galvanised OG primer coated OP pickled and passivated Screws and nuts for Pipe Slide SG property class 8.8, galvanised SF property class 8.8, hot-dip galvanised SA2 V2A stainless steel SA4 V4A stainless steel Pipe outside diameter Bolts and nuts Surface of the Pipe Slide Material of the Pipe Slide Number of Pipe Clamps Pipe Slide type Type name Identifiers TP80 - 2 - W37 - OF - SF - 60.3

Heavy-Duty Pipe Supports 5/2 © ƒ½„¯ƒÀƒÂƒ¿ – A Concept for Progress and Quality 08/07 The standard combinations Selecting heavy-duty pipe supports In the following table you find, in addition to standard combinations for Pipe Slides (bold print) also further possible material/surface finish/attachment combinations. These can also be made on request, if necessary. In addition, the Pipe Slides can be made with a polyamide (PA) sliding seating. Pipe Slide material Pipe Slide code Pipe Slide surface Pipe Slide code Bolts and nuts Code for bolts and nuts S235JR (St37) W37 untreated OR Property class...

Heavy-Duty Pipe Supports © ƒ½„¯ƒÀƒÂƒ¿ – A Concept for Progress and Quality 5/3 08/07 Technical Information Selecting heavy-duty pipe supports Important advice in the use of MÜPRO Pipe Slides: The MÜPRO Pipe Slide can be used individually as an Anchor Point, guidance with and without security against lifting or simply as a support. The MÜPRO Pipe Slide can be fixed to the supporting structure using the appropriate MÜPRO Cramping Sets or MÜPRO Cramping Elements. The Cramping Sets are supplied with bolts and nuts for fixing to the existing supporting structure. For this, the information section...

x Heavy-Duty Pipe Supports 5/4 © ƒ½„¯ƒÀƒÂƒ¿ – A Concept for Progress and Quality 08/07 The MÜPRO Pipe Slide can be used in combination with various MÜPRO Cramping Sets for different functions: 1. MÜPRO Pipe Slide as Anchor Point 2. MÜPRO Pipe Slide as guide with protection against lifting 3. MÜPRO Pipe Slide as guide without protection against lifting 4. MÜPRO Pipe Slide as bearing 1. Application: Anchor Point Pipe Slide with Anchoring Stops, fitted using the Cramping Set type F2AH Selecting heavy-duty pipe supports T-Section Pipe Slide with two welded-on Anchoring Stops using MÜPRO Cramping...

z x z x y Heavy-Duty Pipe Supports © ƒ½„¯ƒÀƒÂƒ¿ – A Concept for Progress and Quality 5/5 08/07 3. Application: Guidance without securing against lifting, Pipe Slide fitted using Cramping Set type F Selecting heavy-duty pipe supports T-Section Pipe Slide fitted using MÜPRO Cramping Set “type F guidance” Due to the guidance of the MÜPRO Pipe Slide only at the side, movement in the pipe axial and vertical directions is possible (2 degrees of freedom). 4. Application: Bearing T-Section Pipe Slide fitted without MÜPRO Cramping Set. The MÜPRO Pipe Slide can move in the x, y and z directions (3 degrees...