Introduction
This document provides an overview of the electronically controlled narrow fabric looms NFRE...ED, NFJM2...ED, and NFJK2...ED by Jakob Müller AG Frick. These looms are designed for weaving elastic and non-elastic, light to medium-weight tapes with Jacquard-pattern warp effects and endless repeat lengths.

Concept
The looms feature advanced tension control for threads, which is crucial in tape weaving. The NFRE, NFJM2, and NFJK2 models are equipped with electronically controlled stepper motors for weft, binder, and locking thread transport, as well as fabric take-off.

Applications
These looms are suitable for creating tapes with interwoven motifs, including names, trademarks, and decorative images. The NFJM2...ED model supports 4-12 heald frames and 192 jacquard functions, while the NFJK2...ED model supports 768 jacquard functions. The NFRE model can handle up to 20 electronically controlled heald frames.

Special Features

• Efficiency class 1 motor with frequency inverter for machine drive.
• Simple weaving speed regulation and adjustment without time losses.
• Electronically controlled stepper motor for regulator and thread transports.
• Weft densities range from 8-120 wefts per cm, allowing for combined weft densities within a pattern.
• Reproducible thread feed settings without machine stops.
• Capability to produce two differing tape widths using two weft thread drives.
• Picot effects possible on the weft insert side.

Control System
The looms are equipped with MÜCAN controls and the MÜDATA®C-series, providing simple operation through a touch screen and pictograms.

Technical Data
The document includes a table with technical specifications such as maximum reed width and the number of weaving heads for various models. The weaving systems supported include I, II, III, V, Z3, Z4, Z5, Z6, and Z10.